Denon ADV-M71 User Manual download pdf (Page 108)

ENGLISH

108

LAST FUNCTION MEMORY

• This unit is equipped with a last function memory which stores the input and output setting conditions as they were immediately before the

power is switched off.

This function eliminates the need to perform complicated resettings when the power is switched on.

• The unit is also equipped with a back-up memory. This function provides memory storage when the power switch is off and with the power

cord disconnected.

INITIALIZATION OF THE MICROPROCESSOR

When the indication of the display is not normal or when the operation of the unit does not shows the reasonable result, the initialization of the

microprocessor is required by the following procedure.

Press the power button to set the

standby mode, then unplug the set’s

power cord from the wall power outlet.

Hold the following PLAY/PAUSE (1/3) button and STOP (2)

button after 30 second, and plug the AC cord into the outlet.

Check that the entire display is flashing with an interval of

about 1 second, and release your fingers from the 2 buttons

and the microprocessor will be initialized.

NOTES:

• If step 3 does not work, start over from step 1.

• If the microprocessor is reset, all the buttons and the setup

settings are reset to the factory default values.

BAND

PHONES

VOLUME

ON / STANDBY

DVD SURROUND RECEIVER ADV-M71

TONE /SDB

FUNCTION

MENU/ SET

SURROUND /SELECT

PUSH

PARAM.

VIRTUAL SPEAKER

ON / STANDBY

Red

1 2 ... 103 104 105 106 107 108 109 110 111 112

No comments

Denon ADV-M71 User Manual Page 108