Denon ADV-M71 User Manual download pdf (Page 13)

ENGLISH

COMPONENT VIDEO IN

B/CB PR/CRY

(6) Connecting to a TV or Monitor Equipped with Component Input Connectors.

• When making connections, also refer to the operating instructions of the other components.

• The video signals input to the VIDEO input (yellow) and S-Video input jacks are not output to the color difference (component) video jacks.

Connecting a monitor TV

COMPONENT VIDEO OUT jack

• Connect the TV’s color difference

(component) video input jacks

(COMPONENT VIDEO INPUT) to the

COMPONENT VIDEO OUT jack using

75 Ω/ohms coaxial video pin-plug

cords.

Color component output connectors (PR/CR, PB/CB and Y)

The red (P

R/CR), blue (PB/CB) and brightness (Y) signals are output independently, achieving more faithful

reproduction of the colors.

• The color component input connectors may be marked differently on some TVs or monitors (P

R, PB and Y/R-

Y, B-Y and Y/C

R, CB and Y, etc.). For details, refer to the TV’s operating instructions.

Connect in this way if your TV is compatible with Progressive Scan.

NOTES:

• Use the three commercially available video cords to connect the ADV-M71’s color component output connectors to the TV or

monitor.

• Set the “TV TYPE” in “VIDEO SETUP” in “DVD SETUP” to comply with your TV’s video format. When the TV is NTSC formated

set to NTSC.

•

About selecting the video output “INTERLACED” or “PROGRESSIVE”, refer to page 39.

CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS

PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE

PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE “STANDARD DEFINITION” OUTPUT.

Monitor TV

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 111 112

No comments

Denon ADV-M71 User Manual Page 13