Denon ADV-M71 User Manual download pdf (Page 14)

ENGLISH

(7) Sound output from this unit digital and analog audio output connectors

2 When a disc is played on the ADV-M71 (DIGITAL OUT)

Refer to

page

DVD video

DVD audio

(video part only)

Audio recording format

Dolby Digital

CP : ON

Video CD

CP : OFF

DTS

48 kHz

• Linear PCM audio is the signal recording format used for music CDs.

While the signals are recorded at 44.1 kHz/16 bit for music CDs, for DVDs they are recorded at 48 kHz/16 bit to 96 kHz/24 bit, providing

higher sound quality than music CDs.

Music CD

MP3/WMA CD

Linear PCM

96 kHz

32 ~ 48 kHz/16 bit PCM

44.1 kHz/16 bit PCM

LPCM conversion mode : OFF

MPEG 1

Linear PCM

MP3/WMA

LPCM conversion mode : ON

LPCM conversion mode : OFF

Digital out : PCM conversion

Digital out : Normal

Digital out : PCM conversion

Digital out : Normal

Settings

96 kHz PCM (when not copy-protected)

48 kHz/16 bit PCM (when copy-protected)

48 kHz/16 bit PCM

48 kHz/16 ~24 bit PCM

2 channels PCM data (48 kHz/16bit)

DTS bitstream

2 channels PCM data (48 kHz/16bit)

Dolby Digital bitstream

Digital audio data output

2 About the LINE-1 and LINE-2 analog recording outputs

When the DVD or the D.AUX digital input is selected:

• Dolby Digital, DTS, AAC and PCM digital signals are automatically converted to 2-channel stereo signals before being output (except

when in the Dolby Headphone mode) and can be recorded in analog. (For what happens in the Dolby Headphone mode, see 3 below.)

When TUNER, LINE-1 or LINE-2 is selected:

• The selected analog audio signals from the tuner or from the device connected to the LINE-1 or LINE-2 analog input terminals (IN) are

output unchanged, regardless of the ADV-M71’s input mode or surround mode. (The same is true for the device connected to the

D.AUX terminals when “LINE-2” under “⁄0 SETTING UP THE SYSTEM – (3) Detailed system setup – [5] Function settings” is set to

“D.AUX”.)

Recording output during playback of a DVD, D.AUX or LINE-1 digital input source in the Dolby Headphone mode:

• In the Dolby Headphone mode with a DVD or a digital input selected, the Dolby Headphone mode analog audio signals currently being

played are output and can be recorded in analog. (See pages 57 and 58.)

Cautions during analog recording of DVDs or digital input sources:

• Do not switch the ADV-M71’s input mode, surround mode or surround parameters during recording. Doing so will interrupt the

sound being recorded.

We recommend setting the surround mode to “STEREO” or “DIRECT”.

• When using headphones, recording is automatically performed in the Dolby Headphone mode. Do not disconnect the headphones

or switch the headphones mode during recording.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 111 112

Comments to this Manuals

No comments

Denon ADV-M71 User Manual Page 14

Comments to this Manuals

Related products and manuals for Acoustics Denon ADV-M71