Denon ADV-M71 User Manual download pdf (Page 36)

ENGLISH

[3] Adjusting the channel level

• Adjust so that the playback levels of the different channels are equal.

• Make this adjustment by listening to the test tones output from the speakers at the listening position.

• By factory default all the levels of all the channels are set to 0 dB.

• This adjustment can also be made directly from the remote control unit. (CH SELECT Button)

If you are not at the system setting changing menu screen,

read step 1 and 2 on page 33.

At the system setting changing menu screen, use the

and

1 cursor buttons to select “Channel Level Adjustment”, then

press the ENTER button.

• The channel level adjustment screen appears.

Use the

and

1 cursor buttons to

select “Auto” or “Manual” for the

“Test Tone” mode.

• The selected setting is displayed

in yellow.

B Auto: Adjust the levels listening to test tones

automatically output from the different speakers.

B Manual: Select the speakers from which the test tones are

output when adjusting the levels.

Detailed settings can be made when this is set to

“Manual” first.

ENTER

Remote control unit Remote control unit

Remote control unit

When “Yes” is selected at “Level Clear”, the level settings

for all the speakers are set to 0 dB.

B Yes: The level settings for all the speakers are set to 0 dB.

B No: The currently set level settings are retained.

Adjust the channel levels in the test tone mode.

Use the

•

and ª cursor buttons to select the “Test Tone

Start” mode, then use the

cursor button to select “Yes”.

The test tone is output.

Use the MASTER VOLUME control on the main unit or the

VOLUME buttons on the remote control unit to adjust the

volume of the test tone to a level at which it is easy to

make this adjustment.

q When “Auto” is selected at “Test Tone”:

• Test tones are automatically output from the speakers at

intervals of 4 seconds for two of the cycles shown below,

then at intervals of 2 seconds from the third cycle on.

Use the

and

1 cursor buttons to adjust the channel levels

so that the volume of the test tones output from the different

speakers sounds the same.

• The level changes in units of 1 dB each time the

and

cursor button is pressed.

The level can be adjusted in the range –12 dB to +12 dB.

Front left Center Front right

Surround rightSurround left Subwoofer

w When “Manual” is selected at “Test Tone”:

Use the

•

and ª cursor buttons to select the speaker from

which the test tone is to be output, then use the

and

cursor buttons to adjust the channel levels so that the volume

of the test tones output from the different speakers sounds

the same.

• The level changes in units of 1 dB each time the

and

cursor button is pressed.

The level can be adjusted in the range –12 dB to +12 dB.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 111 112

Comments to this Manuals

No comments

Denon ADV-M71 User Manual Page 36

Comments to this Manuals

Related products and manuals for Acoustics Denon ADV-M71