Denon ADV-M71 User Manual download pdf (Page 5)

ENGLISH

• This is an anti-magnet type speaker system which can be used near

television sets, etc., but with some TV sets the colors may become

blotchy. If this happens, turn off the TV’s power, wait 15 to 30

minutes, and turn the power back on. The TV’s self demagnetizing

circuit will improve the picture. If the colors are still blotchy, move

the speaker systems further away from the TV.

• Also note that if there is a magnet or any device generating

magnetic force nearby, interaction between this device and the

speaker systems can cause the colors on the TV to become

blotchy.

10 cm/4 inch or more

Wall

CAUTIONS ON HANDLING

• Switching the input function when input jacks are not

connected

A clicking noise may be produced if the input function is switched

when nothing is connected to the input jacks. If this happens, either

turn down the MASTER VOLUME control or connect components

to the input jacks.

• Muting of PRE OUT jacks, HEADPHONE jack and SPEAKER

terminals

The PRE OUT jacks, HEADPHONE jacks and SPEAKER terminals

include a muting circuit. Because of this, the output signals are

greatly reduced for several seconds after the power switch is

turned on or input function, surround mode or any other-set-up is

changed. If the volume is turned up during this time, the output will

be very high after the muting circuit stops functioning. Always wait

until the muting circuit turns off before adjusting the volume.

(1) DVD SURROUND RECEIVER UNIT

• Avoid placing the speaker systems in places exposed to direct

sunlight for long periods of time or near heaters or other heating

equipment.

• Placing in humid or dusty places may result in damage.

• Exposing the cabinet to insecticides or wiping it with benzene,

thinner or other solvents may result in damage or discoloration to

the finish. Use a soft cloth or silicone cloth to wipe any dirt off the

cabinet. Use cloths containing chemical substances with care.

• Do not apply inputs exceeding the speaker system’s max. input (the

input which can be applied a short period of time with regular

program sources).

• The output terminals may differ depending on the amplifier being

used. Consult the amplifier’s instructions.

• Clipping or other problems may occur in the output waveform when

using the speaker systems with a high output and the amplifier’s

tone controls set to the maximum. Avoid using them under these

conditions.

• Never play such special signals as a tape recorder’s fast-forwarding

signals or sine waves continuously.

• When moving the speaker systems, be careful not to apply excess

force to the speaker nets. Doing so could damage the speaker

units.

(2) SPEAKER UNIT [D-M71DVS only]

FEATURES

The ADV-M71 combines an AV amplifier and DVD player, the core

components of a home theater system, into a single compact,

stylish body. The system takes up little space, and the aluminum

front panel and half mirror of the display make for an elegant

design that blends in nicely with the décor in your room.

1. 2-channel power amplifier with Dolby Virtual Speaker

compatibility

The ADV-M71 is equipped with two 35W (6 Ω/ohms 1kHz, T.H.D.

10%) power amplifiers that make it compatible with new Dolby

Virtual Speaker technology for recreating a 5.1-channel

environment virtually using a 2-channel configuration. (Dolby

Virtual Speaker is an proprietary technology of Dolby Laboratories.)

A high performance digital signal processor enables playback of

Dolby Digital and DTS multi-channel surround signals in the Dolby

Virtual Speaker mode. Surround sound can be achieved with the

Dolby Virtual Speaker mode for CDs and other 2-channel sources

in combination with the Dolby Pro Logic

II decoder.

2. 3.1-channel pre-out terminals allowing expansion into a 5.1-

channel surround system

When used in combination with a commercially available

subwoofer with built-in amplifier and power amplifier, the ADV-

M71 can be expanded into a 5.1-channel surround system. The

ADV-M71 not only recreates an accurate sound field for multi-

channel sources, it is also compatible with wide mode playback in

the Dolby Virtual Speaker mode.

3. Dolby Pro Logic II decoder for expanding sound field playback

The ADV-M71 is equipped with a Dolby Pro Logic II decoder for

expanding sound field playback for Dolby Surround and stereo

music sources.

4. DENON’s unique sound field simulation using the DSP

The ADV-M71 is compatible with the Rock Arena, Jazz Club and

Video Game modes with a 2-channel configuration. In a 5.1-

channel configuration, it is also compatible with the 5-Channel

Stereo, Mono Movie and Matrix modes.

WARNING

• For your safety, do not put anything nor lean

yourself on the loudspeakers.

• Do not push the loudspeaker from aside to

protect it from topping that may cause serious

accident.

• Fix speaker cables to prevent being caught on it

and making loudspeakers topping down.

• Whenever the power switch is in the STANDBY state, the

apparatus is still connected on AC line voltage.

Please be sure to unplug the cord when you leave home for,

say, a vacation.

1 2 3 4 5 6 7 8 9 10 ... 111 112

Comments to this Manuals

No comments

Denon ADV-M71 User Manual Page 5

Comments to this Manuals

Related products and manuals for Acoustics Denon ADV-M71