Denon ADV-M71 User Manual download pdf (Page 73)

ENGLISH

DVD

Use the

•

and

cursor buttons to select the MP3 file you

want to play, then press the PLAY (

) button or ENTER

button.

• Playback starts.

The display can be switched between the single elapsed

time and the single remaining time by pressing the

DISPLAY button.

Programmed playback is not possible with MP3 discs.

To change the MP3 file

Press the STOP button, then use the

•

and

cursor

buttons to reselect the desired MP3 file.

To set the random play mode

In the stop mode, press the RANDOM button.

Then press the PLAY (

) button or ENTER button.

To set the repeat mode

The repeat mode changes each time the REPEAT button is

pressed.

NORMAL

TRACK REPEAT

FOLDER REPEAT

≠

To return to the initial disc information screen

Press the STOP (

) button, use the

•

cursor button to

select “ROOT” at the upper right of the screen, then press

the ENTER button.

The screen in step 1 reappears.

Remote control unit

Main unit

ENTER

Remote control unit

NOTES:

• The ADV-M71 is compatible with the “MPEG-1 Audio Layer 3” standards (sampling frequency of 32, 44.1 or 48 kHz). It is not compatible

with such other standards as “MPEG-2 Audio Layer 3”, “MPEG-2.5 Audio Layer 3”, MP1, MP2, etc.

• It may not be possible to play some CD-R/RW discs due to disc properties, dirt, warping, etc.

• The digital signals output when playing MP3 files are MP3 signals converted into PCM, regardless of whether the audio output presenting

is set to “normal” or “PCM conversion”. The signals are output with the same sampling frequency as that of the music source.

• In general, the higher an MP3 file’s bit rate, the better the sound quality. On the ADV-M71, we recommend using MP3 files recorded with

bit rates of 128 kbps or greater.

• MP3 files may not be played in the expected order, since the writing software may change the position of the folders and the order of

the files when writing them on the CD-R/RW.

• Manual search and programmed playback are not possible with MP3 discs.

• When writing MP3 files on CD-R/RW discs, select “ISO9660 level 1” as the writing software format. This may not be possible with some

types of writing software. For details, refer to the writing software’s usage instructions.

• With the ADV-M71 it is possible to display folder names and file names on the screen like titles. The ADV-M71 can display up to 11

characters, consisting of numbers, capital letters, and the “_” (underscore) mark.

• If recorded in a format other than “ISO9660 level 1”, normal display and playback may not be possible. In addition, folder and file names

including other symbols will not be displayed properly.

• Be sure to add the extension “.MP3” to MP3 files. Files cannot be played if they have any extension other than “.MP3” or if they have

no extension. (with Macintosh computers, MP3 files can be played by adding the extension “.MP3” after the file name consisting of up

to 8 capital or numbers and recording the files on the CD-R/RW.)

• Do not apply stickers, tape, etc., to either the label side or the signal side of CD-R/RW discs. If adhesive gets on the surface of a disc,

the disc may get stuck inside the ADV-M71 and be impossible to eject.

• The ADV-M71 is not compatible with packet write software.

• The ADV-M71 is not compatible with ID3-Tag.

• The ADV-M71 is not compatible with play lists.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 111 112

Comments to this Manuals

No comments

Denon ADV-M71 User Manual Page 73

Comments to this Manuals

Related products and manuals for Acoustics Denon ADV-M71