Denon AVR-4802R User Manual

- 1 - DENON AVR/AVC control protocol Ver. 3.7 Application model : AVR-4802R Applicatio

- 10 - EVENT PARAMETER function example *RES. ZM ON MAIN-ZONE ON/OFF change ZMON<CR> OFF ZMOFF<CR> Z1 PHONO MU

- 11 - EVENT PARAMETER function example *RES. TF ****** (6 digits) TUNER Frequency change TF105000<CR> --- ****.** kHz at AM

- 12 - EVENT PARAMETER function example *RES. MS DIRECT SURROUND mode change MSDIRECT<CR> PURE DIRECT MSPURE DIRECT<CR&

- 2 - Protocol specification The following three data forms is defined. COMMAND : The message sent to a system(AVR/AVC) from a controller(Touc

- 3 - The example of a command * <CR> is the meaning of 0x0D. SIDVD<CR> : Select Input source DVD MSTHX SURROUND EX<CR>

- 4 - COMMAND and PARAMETER list COMMAND PARAMETER function example PW ON POWER ON/STANDBY change PWON<CR> STANDBY PWSTA

- 5 - COMMAND PARAMETER function example CV SB UP ---SURROUND BACKch (SBch 1SP) CVSB UP<CR> SB DOWN CVSB DOWN<CR&

- 6 - COMMAND PARAMETER function example Z2 PHONO MULTI ZONE -2 mode set , and select source Z2PHONO<CR> | ---The name

- 7 - EVENT PARAMETER function example MS DIRECT SURROUND mode set MSDIRECT<CR> PURE DIRECT MSPURE DIRECT<CR>

- 8 - EVENT PARAMETER function example PS TONE DEFEAT ON PARAMETER setting PSTONE DEFEAT ON<CR> TONE DEFEAT OFF TONE DEFE

- 9 - EVENT(or RESPONSE) and PARAMETER list EVENT PARAMETER function example *RES. PW ON POWER ON/STANDBY change PWON<CR> STA