Denon PMA-2020AE Owner's Manual download pdf (Page 13)

Setting the Auto Standby mode

With the Auto Standby ON, this unit will automatically enter the

standby mode after about 30 continuous minutes of stop mode with

no operation.

•The default setting is “On”.

Press and hold AMPLIFIER X for at

least 5 seconds.

•Auto Standby mode is switched between

Off and On.

•The Power indicator indicates Auto Standby

mode Off/On during Standby, as shown

below.

Auto Standby mode “Off”

“Lit in red”

Auto Standby mode “On”

“Unlit”

•The Power indicator ﬂashes in red during Auto Standby mode

setting.

If you set the Auto Standby mode while the unit is ON, the unit will

enter the standby mode as soon as the Auto Standby mode setting

is completed.

Starting recording

Press INPUT SELECT.

Set the recorder to the record mode.

Start playing the source to be recorded.

NOTE

•The recording source switches INPUT SELECT is operated during

recording.

•When the SOURCE DIRECT switch is “On”, no audio signal is output

to RECORDER output connectors.

Preparations

Operations

Information

Operations

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

No comments

Denon PMA-2020AE Owner's Manual Page 13