Denon AVR-4800 Operations Instructions Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 69
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
22
2
Enter the setting.
The System Setup Menu reappears.
ENTER
NOTES:
In the Subwoofer Mode screen, you have the flexibility to choose how bass information is distributed to your speakers if you have large front
left and right speakers and a subwoofer as part of your home theater speaker system.
By selecting the “LFE + Main” option, you will be sending the same bass frequencies to both the front left, front right, AND the subwoofer
speakers simultaneously. Depending upon your room size and shape, this can create a more evenly distributed bass around the room or
sometimes actually decrease the amount of bass in the room due to low frequency cancellations.
If the “LFE -THX-” option is selected, bass from the large front left and front right speakers goes ONLY to the front left and front right
speakers. Bass going to the subwoofer comes from the LFE signal and any speakers which you have designated as “Small.” This selection
is preferred by THX as it reduces the chances of bass cancellations in the room.
Once you have positioned all of your speakers in the room, choose the option which gives you the most solid sounding bass.
Setting the THX Surround EX
Set the operation for the digital signals when playing in the Dolby 6.1, DTS (ES) and THX 5.1 EX surround modes.
1
At the System Setup Menu select “THX Surround EX”.
2
Select the desired setting.
3
Enter the setting.
The System Setup Menu reappears.
ENTER
Setting
ON.............The surround back speakers are always used during playback.
Set the “ON” mode to perform 6.1-channel playback with conventional 5.1-channel sources or sources on which the identification
signal described below is not recorded.
AUTO.........This function only works with software on which a special identification signal is recorded. This software is scheduled to go on
sale in the future.
This is a function for automatically playing in the 6.1-channel mode using the surround back speakers if the software is recorded
in THX Surround EX or DTS (ES) or in the normal 5.1-channel mode without using the surround back speakers when the software
is not recorded in THX Surround EX or DTS (ES).
NOTES:
The “THX Surround EX” setting screen is displayed when the surround back speaker is set to “Small” at “Speaker Configuration”.
The surround back speakers can also be turned on and off using the “THX Surround EX” or “6.1/7.1 Surround” surround parameter. (See
pages 49, 51 and 56)
Select the setting according to the program source to be played.
Page view 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 68 69

Comments to this Manuals

No comments