Denon AVR-4800 Operations Instructions download pdf (Page 41)

Select the play mode.

STEREO

(Main unit) (Remote control unit)

Example: Stereo

Start playback on the selected component.

• For operating instructions, refer to the component’s

manual.

Adjust the volume.

MASTER VOLUME

MASTER VOL.

(Main unit) (Remote control unit)The volume level is

displayed on the

master volume level

display.

The volume can be adjusted within the range of –60 to 0 to 18 dB,

in steps of 1 dB. However, when the channel level is set as

described on page 25 or pages 46 and 47, if the volume for any

channel is set at +1 dB or greater, the volume cannot be adjusted

up to 18 dB. (In this case the maximum volume adjustment range

is “18 dB — (Maximum value of channel level)”.)

Input mode when playing DTS sources

• Noise will be output if DTS-compatible CDs or LDs are played in the

“ANALOG” or “PCM” mode.

When playing DTS-compatible sources, be sure to connect the

source component to the digital input jacks (OPTICAL/COAXIAL)

and set the input mode to “AUTO” or “DTS”.

Input mode display

ANALOG DIGITAL

DIGITAL

ANALOG

• In the AUTO mode

• In the PCM mode

• In the DTS mode

• In the ANALOG mode

One of these lights, depending on the

input signal.

Input signal display

DIGITAL PRO LOGIC

LOCK

CH INDICATOR

LOCK

LFE

LOCK

CH INDICATOR

LOCK

LFE

CH INDICATOR

LOCK

LFE

LOCK

• DOLBY DIGITAL

• DTS

• PCM

One of these lights, depending on the

input signal.

Lit

The LOCK LED lights when digital signals are being input properly.

If the LED does not light, check whether the digital input

component setup (page 28) and connections are correct and

whether the component’s power is turned on.

NOTE:

• The digital input indicator will light (green) when playing CD-

ROMs containing data other than audio signals, but no sound

will be heard.

After starting playback

[1] Adjusting the sound quality (tone)

The tone control function will not work in the Direct or Home THX

Cinema mode.

Adjust the bass sound to the desired level using the BASS

adjustment control, the treble sound using the TREBLE

adjustment control.

BASS

TREBLE

• To increase the bass or treble: Turn the control clockwise.

(The bass or treble sound can be increased to up to +12 dB

in steps of 2 dB.)

• To decrease the bass or treble: Turn the control counter

clockwise. (The bass or treble sound can be decreased to

up to –12 dB in steps of 2 dB.)

If you do not want the bass and treble to

be adjusted, turn on the tone defeat

mode.

The signals do not pass through the

bass and treble adjustment circuits,

providing higher quality sound.

TONE

DEFEAT

[2] Listening over headphones

Plug the headphones’ plug into the jack.

Connect the headphones to the PHONES jack.

The pre-out output (including the speaker output) is automatically

turned off when headphones are connected.

NOTE:

To prevent hearing loss, do not raise the volume level excessively

when using headphones.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 68 69

Comments to this Manuals

No comments

Denon AVR-4800 Operations Instructions Page 41

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-4800