Denon DBP 4010UDCI User Manual download pdf (Page 17)

TroubleshootingInformationHDMI Control FunctionPlaybackSetupGetting Started Specications

ENGLISH



1. Home Theater Playback – Playing Back Using Multi-channel System –

Setting HDMI Audio Output

When you press and set “HDMI Setup” – “Audio Setup” to “Auto” (vpage 23) on the GUI menu,

audio mode is set according to the connected device.

When you want to set the HDMI audio output separately, change according to the following table.

Refer to the owner’s manual of the connected device regarding HDMI audio input specications

compatible with the connected device.

•

Device to be connected Setting items About output signal and speaker settings

Device with the following

built-in decoder

Dolby TrueHD

Dolby Digital Plus

Dolby Digital

DTS-HD

DTS

Auto

DBP-4010UDCI outputs a bitstream signal that is decoded

by the connected device.

In this case, you cannot make a speaker setting for HDMI

audio with the DBP-4010UDCI.

Make the setting with the connected device.

When outputting the Dolby TrueHD or DTS-HD audio,

press and set “BD Audio Mode” to “HD Audio

Output” (vpage 32).

Device compatible with

multi-channel HDMI audio

input, but not capable of

speaker setting for each

channel

Multi LPCM

BM On

Outputs multi-channel Linear PCM audio signals with

speaker setting by the DBP-4010UDCI.

For speaker setting, on the GUI menu, “Audio Setup”

– “7.1ch Audio Out”– “Multi Channel” – “Speaker

Conguration” (vpage 25).

BM : Bass Management (means multi-channel speaker

setting)

Device compatible with

multi-channel HDMI audio

input, and capable of

speaker setting for each

channel

Multi LPCM

BM Off

Output of multi-channel Linear PCM audio signals from the

DBP-4010UDCI.

Perform the speaker setting with the connected device.

BM : Bass Management (means multi-channel speaker

setting)

Device compatible with 2-

channel HDMI audio input

2ch

Downmixed 2-channel Linear PCM audio signals are output

from the DBP-4010UDCI.

Perform the speaker setting with the connected device.

Device not compatible with

HDMI audio signal input

Mute

Audio signal are not output from the DBP-4010UDCI’s

HDMI terminal.

Only video signals are output from the HDMI terminal.

Make the audio connection.b

NOTE

When the HDMI video resolution is set to “1080P24”, HDMI video signals are output from the DBP-

4010UDCI with a resolution of 1080P and a frame rate of 24 frames per second, regardless of the video

signals on the disc being played. Because of this, when playing discs containing video signals recorded

with a frame rate of something other than 24 frames per second, the movement of the picture may be

unnatural. If this happens, set the HDMI video resolution to something other than “1080P24”.

When the “I/P Direct” (vpage 23) setting is “On” and a disc with a frame rate of 24 frames per second

is played, no video signals are output from the video or S-Video outputs.

When the “I/P Direct” (vpage 23) setting is “Off”, “1080P24” is not displayed.

•

Audio signal from the HDMI output terminal

You can change the audio format and playback number of channels according to the specications of

the device to which the DBP-4010UDCI’s HDMI audio output signals are input. Make settings while

checking the specications of the audio device to be connected as well as the audio format/number

of channels stored in media and les for playback.

Media/Files Audio format

Setting “HDMI Setup” – “Audio Setup” (vpage 23) on

the GUI menu

Auto

Multi LPCM

BM On/Off

2ch

Dolby Digital

Multi LPCM

2 ch Downmix

LPCM

Dolby Digital Plus

Dolby TrueHD

DTS

DTSz1

DTS-HD

DTS-HDz1

LPCM Multi LPCM

AVCHD

Dolby Digital Dolby Digital

Multi LPCM

2 ch Downmix

LPCM

LPCM Multi LPCM

DVD-Video

Dolby Digital Dolby Digital

DTS DTS

LPCM 2 ch LPCM

DVD-Audio LPCM, PPCM

Multi LPCM

2 ch Downmix

LPCM

Super audio CD

Multi area

Stereo area

2 ch LPCM

CD layer

DivX

Dolby Digital Dolby Digital Multi LPCM

2 ch Downmix

LPCM

MP3, MP2

2 ch LPCM

CD, MP3, WMA, AAC, LPCM

DTS-CD DTS Multi LPCM

2 ch Downmix

LPCM

z1 :

Multi LPCM signals are output when “BD Audio Mode” is set to “Mix Audio Output ” (

vpage 32).

Multi LPCM signals are output when outputting HDMI video signals with resolutions of 480i/576i or

480p/576p.

z2 :

Super Audio CD audio signals are output at 44.1 kHz 16-bit.

Even if “HDMI Setup” – “Audio Setup” on the GUI menu is set to “Auto” (vpage 23), multilinear PCM

or downmixed 2-channel linear PCM signals are output if a device that does not support bitstreams is

connected.

Connections

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 68 69

Comments to this Manuals

No comments

Denon DBP 4010UDCI User Manual Page 17

Comments to this Manuals

Related products and manuals for Blu-Ray players Denon DBP 4010UDCI