Denon DBP 4010UDCI User Manual download pdf (Page 50)

ENGLISH



TroubleshootingInformationSetupConnectionsGetting Started Specications

Operations Enabled During Playback

During playback of a BD or DVD-Video recorded with several

camera angles, you can change the angle.

Switching the Angle

DVD-V

NOTE

Angle changing may be restricted, depending on the disc.

Press during playback.

The angle number currently being played is displayed.

Angle

1/3

Use to select angle.

Angle

2/3

Press .

The setup screen disappears.

Press .

The display brightness each time the button is

pressed.

Normal Dim Dark Off

Changing the Brightness of the

Display (Dimmer Control)

Even when “Off” is selected, the status of operations that are

performed appears momentarily on the display if “Display Setup”

– “Temporary Display” on the GUI menu is set to “On” (vpage 30).

When you make an HDMI connection with a TV or AV Amp compatible

with DBP-4010UDCI and HDMI control functions, you can perform

the following operations by setting the HDMI control function of each

device.

TV or AV Amp power is turned on by operating the

DBP-4010UDCI, and functions change with DBP-

4010UDCI input.

Turning off the TV’s power turns the DBP-

4010UDCI’s power to standby.

Operating the DBP-4010UDCI via the TV’s remote

control.

(When the TV’s remote control has player operation buttons)

If the HDMI control function does not operate properly, check the

following points.

Is the TV or AV Amp compatible with the HDMI control function?

Are the HDMI control function settings of all equipment correct?

(Step 3)

After setting, did you add another HDMI device connection or

make any changes in the connections? In this case, perform setting

again.

•

HDMI Control Function

NOTE

The HDMI control function controls operations of a TV that is

compatible with the HDMI control function. Make sure that the TV

and HDMI are connected when you perform HDMI control.

Some functions may not operate depending on the connected TV

or AV Amp. Check the owner’s manual of each device for details

beforehand.

When “Other Setup” – “Power Saving” on the GUI menu is set

to “Power Saving Standby” or “Normal Standby” (vpage 31),

the player’s power cannot be turned on using the HDMI control

function.

When “HDMI Setup” – “HDMI Control” – “Power Off Control” on the

GUI menu is set to “Off” (

vpage 24), the DBP-4010UDCI is not set

to standby even if the connected device is in the standby mode.

When “DENON LINK Setup” – “DENON LINK Mode” on the GUI

menu is set to “4th”, the HDMI control function is enabled for the

connected devices.

•

Set HDMI control function to “On”.

On the GUI menu, set “HDMI Setup” – “HDMI Control” (vpage

24).

Turn the power on for all the equipment connected by

HDMI cable.

Set the HDMI control function for all equipment

connected by HDMI cable.

On the GUI menu, set the DBP-4010UDCI with “HDMI Setup”

– “HDMI Control” (vpage 24).

Please refer to the owner’s manual as regards setting of connected

devices.

Carry out Steps 2 and 3 should any of the equipment be

unplugged.

To ensure that the DBP-4010UDCI’s HDMI video

output is projected on the TV screen, change the

input function of the TV and AV Amp.

When you turn the TV’s power to standby, check that

the power of the DBP-4010UDCI and AV Amp also

goes on standby.

Playback HDMI Control Function

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 68 69

Comments to this Manuals

No comments

Denon DBP 4010UDCI User Manual Page 50

Comments to this Manuals

Related products and manuals for Blu-Ray players Denon DBP 4010UDCI