Denon RCD-M38 Owner's Manual download pdf (Page 26)

ENGLISH

Getting Started Basic Connections

Advanced ConnectionsBasic Operations Advanced OperationsAdvanced Operations TroubleshootingExplanation terms Speciﬁ cations Index

<1/3><5>

ON/STANDBY

<8/–>

ON/STANDBY

[

uio

]

[CD 1/3]

[TUNER]

[USB/iPod 1/3]

[DOCK 1/3]

[MENU]

[SLEEP]

[ENTER/MEMO]

Button located on both the main unit and the remote control

BUTTON

Button only on the main unit

Button only on the remote control

[BUTTON]

Symbols used to indicate buttons in this manual

Other functions

Using an optimizing ﬁ lter

An optimizing ﬁ lter suited for the properties of the speakers (SC-M37)

can be used.

Press [MENU].

Use [ui] to select “SPK OPTIMISE”, then press

the [ENTER/MEMO] or [p].

Use [ui] to select “ON”, then press the [ENTER/

MEMO]

or [p].

The setting is entered.

The response is optimized for the speakers (SC-M37, sold

separately).

OFF

The response is ﬂ at.

Auto power on

When the power is in standby, the power turns on when any of

the buttons below other than ON/STANDBY is operated, and the

respective operation is performed.

• <5> ...............................................The disc tray opens.

• <1/3> for the different source ....Playback of that source starts.

• [TUNER] ........................................Playback of the tuner starts.

NOTE

The Auto Power On function cannot be used with control dock for

iPod.

Auto source selector function

When one of the buttons below is pressed, it switches to that source

and starts playback on that source.

• [CD 1/3] ................... The source switches to “DISC” and the disc

starts playing.

• [USB/iPod 1/3] ........ The source switches to “USB” and the USB

starts playing.

• [DOCK 1/3] .............. The source switches to “AUX1/Dock” and the

iPod starts playing.

• [TUNER] ..................... The source switches to “TUNER” and the

band last set is tuned in.

Auto standby

With the Auto standby ON, this unit will automatically enter the

standby mode after about 30 continuous minutes of stop mode with

no operation.

Press [MENU].

Use [ui] to select “AUTO STANDBY”, then press

[ENTER/MEMO] or [p].

Use [ui] to select “ON”, then press [ENTER/

MEMO]

or [p].

The setting is entered.

NOTE

In the following situations, the Auto standby function does not operate.

• When an iPod or USB memory device is connected to the USB port

on the unit.

• When the source is “TUNER”、“AUX1” or “AUX2”.

• When the source is “AUX1/Dock”, and an iPod is connected to

control dock for iPod. (ASD-11R only)

• When the source is “PORTABLE IN” and a device is connected to

the portable jack.

Last function memory

This stores the settings as they were immediately before going into

the standby mode.

When the power is turned back on, the settings are restored to as

they were immediately before going into the standby mode.

Resetting the microprocessor

Perform this procedure if the display is abnormal or if operations

cannot be performed.

When the microprocessor is reset, all the settings are reset to their

default values.

Unplug the power cord.

Plug the power cord into a power outlet while pressing

<8/–> and <SDB/TONE> simultaneously.

• “INITIALIZE” is displayed.

If “INITIALIZE” does not display in step 2, start over from step 1.

1.RCDM38E3_ENG_004_1st.indd 231.RCDM38E3_ENG_004_1st.indd 23 2010/05/17 14:17:102010/05/17 14:17:10

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 36 37

Comments to this Manuals

No comments

Denon RCD-M38 Owner's Manual Page 26

Comments to this Manuals

Related products and manuals for Car media receivers Denon RCD-M38