Denon RCD-M38 Owner's Manual Page 27

  • Download
  • Add to my manuals
  • Print
  • Page
    / 37
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 26
ENGLISH
24
If a problem occurs fi rst check the following:
1. Are the connections correct?
2. Is the set being operated as described in the owner’s manual?
3. Are the other components operating properly?
If this unit does not operate properly, check the items listed in the table below. If the problem persists,
there may be a malfunction.
In this case, disconnect the power immediately and contact your retail outlet.
GGeneralH
Symptom Cause Countermeasure Page
Set does not
operate properly.
External noise or interference is
causing the set to malfunction.
Reset the microprocessor. 23
Display not lit
and sound not
produced when
power switched
to on.
Power cord not plugged in
securely.
Check the connections on
the set's rear panel and the
connection of the power plug to
the power outlet.
10
Display lit but
sound not
produced.
Wrong input source selected.
Volume control set to minimum.
MUTING is on.
Select the appropriate input
source.
Turn volume up to suitable level.
Switch off MUTING.
11
11
12
Display is off. The Dimmer setting is set to
“OFF”.
Set to something other than
“OFF”.
12
Power turns off
suddenly and
power indicator
ashes red.
(Flashes at 0.5
second intervals)
Protection circuit activated due
to a rise in internal temperature.
Core wires of two speakers
are touching each other or a
core wire is sticking out of
the terminal and touching the
set’s rear panel, activating the
protection circuit.
Turn off the power, wait for the
set to fully cool down, then turn
the power back on.
Place the set in a well-ventilated
location.
First unplug the power cord,
then twist the core wires tightly
or terminate the speaker cables,
then reconnect.
8
II
8
Power turns off
suddenly and
power indicator
ashes red.
(Flashes at 0.25
second intervals)
Set is damaged. Turn off the power and contact
a DENON service center.
TroubleshootingExplanation terms
B
Bit rate
This expresses the read amount per 1 second of
video/audio data recorded in a disc.
D
Dynamic range
The difference between the maximum undistorted
sound level and the minimum sound level that is
discernible above the noise emitted by the device.
F
Finalize
This is processing that enables playing back of disc
of CD, which was recorded using a recorder, by
other players.
M
MP3 (MPEG Audio Layer-3)
This is an internationally standardized audio data
compression scheme, using the “MPEG-1” video
compression standard. It compresses the data
volume to about one eleventh its original size while
maintaining sound quality equivalent to a music CD.
MPEG (Moving Picture Experts Group), MPEG-2,
MPEG-4
These are the names for digital compression format
standards used for the encoding of video and audio.
Video standards include “MPEG-1 Video”, “MPEG-
2 Video”, “MPEG-4 Visual”, “MPEG-4 AVC”. Audio
standards include “MPEG-1 Audio”, “MPEG-2
Audio”, “MPEG-4 AAC”.
P
Protection circuit
This is a function to prevent damage to components
within the power supply when an abnormality
such as an overload, excess voltage occurs or
temperature for any reason.
In this unit, the power indicator blinks and the unit
enters standby mode when an abnormality occurs.
S
Sampling frequency
Sampling involves taking a reading of a sound wave
(analog signal) at regular intervals and expressing
the height of the wave at each reading in digitized
format (producing a digital signal).
The number of readings taken in one second is
called the “sampling frequency”. The larger the
value, the closer the reproduced sound is to the
original.
Speaker impedance
This is an AC resistance value, indicated in Ω
(ohms). Greater power can be obtained with this
value smaller.
W
WMA (Windows Media Audio)
This is audio compression technology developed by
Microsoft Corporation.
WMA data can be encoded using Windows Media
®
Player Ver.7, 7.1, Windows Media
®
Player
for Windows
®
XP and Windows Media
®
Player 9
Series.
To encode WMA fi les, only use applications
authorized by Microsoft Corporation. If you use
an unauthorized application, the fi le may not work
properly.
1.RCDM38E3_ENG_004_1st.indd 241.RCDM38E3_ENG_004_1st.indd 24 2010/05/17 14:17:102010/05/17 14:17:10
Page view 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 36 37

Comments to this Manuals

No comments