Denon RCD-M38 Owner's Manual Page 35

  • Download
  • Add to my manuals
  • Print
  • Page
    / 37
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 34
Specifications
ENGLISH
3
Getting Started Removing the Speaker NetConnections
Removing the Speaker Net
CAUTION
Be sure to turn the amplifiers power off before connecting the
speakers to the amplifier.
If the polarities are inverted, the phase may be off and the sound
may have no bass component, making it seem unnatural. Be sure to
connect the polarities properly.
Connections
When connecting, be sure to read the amplifiers owners manual
carefully and connect properly.
Connect the input terminals on the rear panel of the speaker with the
speaker output terminals on the amplifier, using the speaker cables
(Supplied).
Connect the speaker for the left channel to the “L” terminal on the
amplifier, the speaker for the right channel to the “R” terminal on the
amplifier, making sure to check the polarities (“+” and “–”).
There are various types of speaker output terminals on amplifiers.
Check your amplifiers owner’s manual.
Connections
Once connections are completed, pull gently on the speaker cables to
check that they are securely connected.
CAUTION
Do not let the core wires of two speaker cables touch each other.
Doing so will short-circuit the amplifier circuitry and damage the
amplifier.
1
Twist rmly the wires by hand so
that they do not stick out and cause
short-circuits.
2
Loosen the terminal by turning to the left and insert
the speaker cable through the hole in the speaker
terminal.
3
Tighten the terminal by turning to the right and check
that the core wire is not protruding from the hole.
Connect to amplifiers
“+”side: Plain core
Connect to amplifier’s
“–” side: Striped core
“–” side
terminal: Black
“+” side terminal: Red
Use the included speaker cable to connect the input terminals on the
back of the speakers to the amplifier’s speaker output terminals.
The net on the front of the speakers can be removed.
To remove, grasp both sides of the net and pull forward.
To mount, line up the projecting pieces in the four corners of the
speaker net with the holes in the four corners of the cabinet and
press in.
Sheath
Page view 34
1 2 ... 30 31 32 33 34 35 36 37

Comments to this Manuals

No comments