Denon UD-M31 Operations Instructions download pdf (Page 5)

(option)

CONNECTIONS

NOTES:

• Do not plug power supply cords into power outlets

until all connections have been completed.

• Check the left and right channels and be sure to

interconnect them correctly (L to L, R to R).

• Plug in the power supply cords securely. Incomplete

connections will result in noise.

• Clasping the power supply cords and connection

cords together may result in humming or noise.

• After unplugging the power supply cord, wait at

least 5 seconds before plugging it back in.

Recommended System Installation

• To ensure performance and stability, install the D-M31

series as shown below.

• Do not place another component directly on top of the

CD receiver (UD-M31/M51).

• For stability, do not stack more than three components

on top of each other.

Connect the DMD-M31‘s SYSTEM CONNECTOR

jack (1 or 2) to the SYSTEM CONNECTOR jack of

one of the other components using the included

system cord.

Connect the DMD-M31’s DIGITAL OPTICAL IN

jack (1 or 2) to the DIGITAL OPTICAL OUT jack of

the CD receiver using optical connection cord.

Plug the power supply cord into a CD receiver’s

AC outlet or cassette deck’s AC outlet.

Connect the DMD-M31‘s LINE1 OUT jacks to the

CD receiver’s LINE1 IN jacks using the included

stereo audio cord.

Connect the DMD-M31‘s LINE1 IN jacks to the CD

receiver’s LINE1 OUT jacks using the included

stereo audio cord.

✽ The DMD-M31 can also be used when connected to

a receiver other than the one in D-M31 series. In this

case, none of the system functions (auto power on,

etc.) will work.

(option)

Connecting to the D-M31 Series

2 When connecting to a receiver other than the one in

the D-M31, there is no need to make connection 3.

Note that in this case none of the system functions

(auto power on, etc.) will work.

• System operations such as the auto power on function

can only be used if stereo audio cords and system cords

are connected between all the system components. Be

sure to securely connect all the connection cords

between all the units.

• Disconnecting a system cord during system operation

may result in malfunction. Be sure to unplug the power

supply cords before changing the connections.

• Install the components in such a way that the

ventilation holes of the CD receiver (UD-M31/M51) are

not obstructed.

• Use the AC OUTLET for audio equipment only. Do

not use them for hair driers, etc.

FM antenna

AM loop antenna

RightSubwoofer Left

Speaker systems

Power plug

AC 230 V 50 Hz

(Plug into a power outlet)

Cassette deck

(DRR-M31)

Power supply cord

(for U.K. model)

CD receiver (UD-M31/M51)

MD recorder (DMD-M31)

18Tr02m 46s

-60 -40 -30 -20 -12 -6 -2 0

18Tr02m 46s

-60 -40 -30 -20 -12 -6 -2 0

UD-M31/M51

DRR-M31

DMD-M31

UD-M31/M51

DMD-M31

DRR-M31

Install the sets as shown in one of these

diagrams. In either case, be sure that the

CD receiver’s ventilation holes are not

obstructed.

Side by side installation

Stacking installation

✽ The illustration of the CD receiver in the diagram or the

operation description is for the UD-M31.

1 2 3 4 5 6 7 8 9 10 ... 33 34

Comments to this Manuals

No comments

Denon UD-M31 Operations Instructions Page 5

Comments to this Manuals

Related products and manuals for Car media receivers Denon UD-M31