Denon DN-780R User Manual download pdf (Page 8)

ENGLISH

CASSETTE TAPES

2 Handling Precautions

• C-120 cassette tapes

C-120 cassette tapes are not recommended as

they use a very thin tape base which may become

tangled around the capstan or pinch roller.

• Tape Slack

Before putting a tape into the deck, take up any

slack with a pencil or your finger tip. This

precaution prevents the tape from becoming

entangled around the capstan or pinch roller.

2 Storage Precautions

• Do not store cassette tapes in a place where they

will be subject to:

• Extremely high temperature or excessive

moisture

• Excessive dust

• Direct sunlight

• Magnetic fields (near TV sets or speakers)

• To eliminate tape slack, store your cassettes in

cassette cases with hub stops

2 Accidental Erasure Prevention

• All cassettes have erasure prevention tabs for each

side. To protect valuable recordings from accidental

or inadvertent erasure, remove the tab for the

appropriate side with a screwdriver or another tool.

• To record on a tape whose erasure prevention tabs

have been removed, cover the tab holes with

adhesive tape.

Erasure prevention tab for

side A

Erasure prevention tab for side B

AUTOMATIC TAPE SELECTION

This Stereo Cassette Deck contains an automatic tape

selector which automatically selects the optimum

bias and equalization for the tape in use.

This is accomplished by detection of the tape type

detections holes in the cassette housing.

• If a tape without tape type detection holes is

used, the deck will be set for normal tapes.

Detection holes

for chrome tape

Detection holes

for metal tape

PLAYBACK

• The operations described below apply to deck A

and deck B alike.

• The numbers in the illustration below depict the

order in which operation steps are carried out.

q Press the POWER switch q to the ON ( ¢ )

position.

w Press the Eject ( 5 ) button !9 to open the cassette

compartment cover !6.

e Load the cassette tape and close the cassette

compartment cover !6.

r When listening to a tape that has been recorded

with Dolby noise reduction, set the DOLBY NR

switch e to match the system used at the time of

recording.

t Select the type of tape transport with the REV.

MODE button @0.

2 RELAY PLAY (continuous playback of the tapes

in deck A and deck B)

• Load a cassette tape into deck A and B, and set the

DOLBY NR switch correctly on deck A and B.

• In the relay play mode, the Deck A and Deck B play

signals are output from the DECK A LINE OUT

jacks.

q REV. MODE button @0 set to “RELAY”.

w Press the Play ( 0 or 1 ) button !4 of the deck

you first wish to listen to. The Play ( 0 or 1 )

indicator of the deck playing back the tape will

light up.

e To stop relay play, press the Stop ( 2 ) button !4

of the deck currently playing the tape.

• The number of cycles for relay playback can be

selected (1, 5 or 10).

For details, refer to “PRESET FUNCTION”

(page 11). When playback starts from deck B,

when switching to deck A, the first deck A

playback cycle will be counted as the second

cycle. The completion of cycles will always be

at the opposite side of the tape in deck B.

• If the playback deck has been switched, be

sure to start playback in the forward direction

(1).

NOTE :

In the relay play mode, it is not possible to perform

the play operations simultaneously on Decks A and

B. If one of the decks is set to the play mode while

the other deck is already in the play mode, playback

is performed on the deck that has just been set to

the play mode and stops on the other deck.

y Press the Play ( 0 or 1 ) button !4 to begin

playback. The Play ( 0 or 1 ) indicator will light

during playback.

u Press the Stop ( 2 ) button !4 to stop the playback.

• If different types of Dolby noise reduction are

used for record and playback, playback response

will be adversely effected.

• When power is turned off during tape transport,

it may not be possible to remove the cassette

by pressing the Eject ( 5 ) button !9.

In this case, turn on power again before you

press the Eject ( 5 ) button !9.

Mode Indicator

To listen to one side only

To listen to repeat playback of

both sides

To listen to continuous playback

of both sides and both decks.

RELAY

CASCADE

2 TWIN OUTPUT

With the DN-780R, it is possible to play tapes

simultaneously on decks A and B and output their

signals at the same time.

When both decks A and B are played, the signals for

deck A are output from the DECK A LINE OUT jacks,

and the signals from deck B are output from the DECK

B LINE OUT jacks..

• The DECK B LINE OUT jacks are exclusively for the

deck B signals.

• The DECK A LINE OUT jacks are for both the deck

A and deck B signals when deck A line output

select switch set to “A+B”.

• Use the DECK A LINE OUT jacks when connecting

one of the sets of line outputs to a receiver or

amplifier.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

Comments to this Manuals

No comments

Denon DN-780R User Manual Page 8

Comments to this Manuals

Related products and manuals for Cassette Decks Denon DN-780R