Denon RC-8001ST Operations Instructions download pdf (Page 12)

ENGLISH

Starting playback from the Middle of a track

(Manual Search)

★ Once the track is selected with the track select knob and the

PLAY/PAUSE button is pressed, playback starts from the beginning

of that track. If you wish to start from a different position, use the

procedure described below to search for the desired position.

Find the play start position.

Press the JOG MODE button to select the jog/shuttle wheel

to the search mode.

Turn the shuttle ring to change the playback position quickly.

(Search for the approximate playback position.)

EARCH

SCAN

RVS FWD

The fast forward/reverse mode is set when

the shuttle ring (outer) is turned.

The speed changes according to the angle

at which the ring is turned.

• When operated during playback, playback resumes after

the operation.

• When playback is started, the jog wheel is set to the bend

mode.

• When turned fully in either direction, the disc skips 1

minute forward or backward then plays for 3 seconds,

and continues until released.

Turn the jog wheel.(Search for the precise playback position.)

ARCH

SCAN

RVS FWD

When the jog wheel (inner side) is turned,

the frame search mode is set.

The playback position can be moved in

units of one frame.

Listen to the track and find the desired play start position.

Shockproof memory

• A maximum of approximately 10 seconds uncompressed

audio data is stored into memory (per drive). This guards

audible interruptions due to external mechanical shocks

such as bumps or other hard vibrations.

• If advanced data reading is not possible due to scratches or

dirt on the disc, playback stops once the data stored up to

that point is read.

• If less than 3 seconds worth of data remains in the memory,

track, minute, second and frame displays flashes, indicating

that playback will stop.

• The display returns to normal once the amount of data in the

memory increases.

BASIC OPERATION

PLAY/PAUSE and CUE

★ The operation switches between play and pause each time the

PLAY/PAUSE button is pressed.

★ When the CUE button is pressed during playback, the pickup

returns to the position at which playback was started.

The diagrams below show playback patterns when the PLAY/PAUSE

and CUE buttons are pressed.

PLAY and PAUSE

When the PLAY/PAUSE button is pressed, playback starts and

proceeds as shown by the arrow on the diagram above.

If the PLAY/PAUSE button is pressed again during playback, the

pause mode is set at that point. Press the PLAY/PAUSE button again

to resume playback.

PLAY and CUE

When the CUE button is pressed after starting playback by pressing

the PLAY/PAUSE button, the pickup returns to the position at which

playback was started and prepares for the next playback.

Press the PLAY/PAUSE and CUE buttons alternately to start playback

repeatedly from the same position. (Checking the playback position)

This function is called “Back Cue”.

PLAY/PAUSE

button

pressed

PLAY/PAUSE

button

pressed

PLAY/PAUSE button pressed

Position on disc

Pause mode set at this point

Section

played

Section

played

PLAY/PAUSE

button

pressed

CUE button pressed

Position on disc

Section

played

Back Cue

PLAY, PAUSE and CUE

If the pause mode is set and playback is then resumed, the position

to which the pickup returns with the Back Cue function changes.

Sleep mode

• The sleep mode is set if no operation is performed for 30

minutes while in the standby or pause mode. In the sleep

unnecessary wear to the internal parts.

• The sleep mode can be canceled by pressing the

PLAY/PAUSE or CUE button.

PLAY/PAUSE

button

pressed

PLAY/PAUSE

button

pressed

PLAY/PAUSE

button

pressed

Section

played

Section

played

Position on disc

CUE

button pressed

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Denon RC-8001ST Operations Instructions Page 12

Comments to this Manuals

Related products and manuals for CD players Denon RC-8001ST