Denon DRM-555 User Manual download pdf (Page 4)

Contact - IS Helpdesk on Ext. 55909 or E-mail - [email protected]

ANU Audio Visual Services

Overhead Projector (3M 9200)

MCC T6

Set up

1. Raise the post until it locks into place.

2. Plug in power cord and turn on. Adjust image to screen

elevation (A).

3. Focus the projected image by turning Focus Knob (B).

Fold Down

1. Raise projection head up to the maximum. Fold mirror

down (A).

2. Release the post lock (B).

3. Fold down the post. Secure the post in post cradle (C).

4. Rotate focus knob to minimum.

Lamp Replacement

1. Turn projector off and unplug the power cord.

2. Lift up top cover.

3. Remove and discard the old lamp (see fig A).

4. Install new lamp.

5. Push fully and squarely into socket (see fig B).

6. Close the top cover.

Lamp Changer

1. The 3M 9100 has a lamp changer feature.

2. To activate the second lamp, rotate the lamp changer

knob (1).

3. The 3M 9100 has an indicator that lights up red (2).

This visual reminder alerts the operator that one or both

lamps are burned out or missing.

4. The High-Low lamp switch (3) is located in the top

front control panel. Low is recommended for normal

use, High is recommended for LCD projection panels.

Color Tuning

1. To eliminate red or blue corners on the screen, rotate the

colour tuning dial.

a. Blue Corners - Rotate dial to the left.

b. Red Corners - Rotate dial to the right.

Adjust Focus Knob

1 2 3 4 5 6 7 8 9 10 11

No comments

Denon DRM-555 User Manual Page 4