Denon DN-X1100 - DJ Mixer Owner's Manual download pdf (Page 6)



Connections Fader Start

ENGLISH

Speciﬁcations

Top Panel

Part Names and Functions

q

w

e

r

t

y

u

i

o

Q0

Q1 Q2 Q3 Q1 Q4 Q5 Q6

Q9

W0

W1

W2

W3

W4

W5

W6

W7W8W9E1

E0

E2

Q7

Q8

q MAIN MIC ON/OFF button

When the button is lit, Main Mic signal is

transferred to output section, otherwise Main

Mic input is muted.

w AUX MIC ON/OFF button

When the button is lit, Aux Mic signal is

transferred to output section, otherwise Aux

Mic input is muted.

e MAIN MIC LEVEL control

Adjusts the level of the Main Mic input.

r AUX MIC LEVEL control

Adjusts the level of the Aux Mic input.

t MIC EQ controls

Contour the frequency response of the Mic

input –12 dB to +12 dB.

HI

Adjusts high-tone Mic sound –12 dB to +12 dB.

At the center position, sound is ﬂat.

MID

Adjusts mid-tone Mic sound –12 dB to +12 dB.

At the center position, sound is ﬂat.

LOW

Adjusts low-tone Mic sound –12 dB to +12 dB.

At the center position, sound is ﬂat.

y DUCKING ON/OFF button

• Use this to switch the Talk Over function ON and

OFF. (ON/OFF is cyclic)

• When the button is lit, level of signals except

Mics is attenuated.

• The DUCKING attenuation level adjusts. See

below rear panel o (vpage 4).

u SPLIT CUE button

• In the STEREO mode, this button feeds STEREO

Program (CUE MASTER) and Cue to both

earcups, in the SPLIT CUE (MONO) mode, the

headphone circuit provides MONO Cue to the

left ear and MONO Program (MASTER) to the

right.

• In the STEREO mode, the meter indicates the

stereo level in the LEFT and RIGHT Master

Outputs. In the SPLIT CUE (MONO) mode,

mono Cue level is displayed on the Left meter

and mono Program (CUE MASTER) level is

displayed on the Right meter.

• In the SPLIT CUE (MONO) mode, the button is

lit.

i HEADPHONE PAN control

Serves two purposes∙∙∙ In the STEREO mode

it changes the relative levels of the Cue and

Program mixed together in both ear cups. In the

MONO mode it changes the balance between

the Mono Cue in the left ear cup and the Mono

Program in the right.

o HEADPHONE level control

Adjusts the volume for the headphones.

Q0 HEADPHONE output jack

Accepts 1/4” stereo headphone plugs.

Q1 CROSSFADER START A, B switches

Use this to switch the Crossfader Start function

ON and OFF.

Q2 CROSSFADER

Controls the relative output level from the

summed A and B Mixes. When the fader is

at its far left, only the A Mix is heard from the

Outputs. As the fader is moved toward the

right, the amount of B Mix is increased and the

amount of A Mix is decreased. When the fader

is centered, equal amounts of A and B Mixes are

routed to the Outputs. Fully right is all B Mix at

the Outputs.

• LINE 2, 4, 6, 8 FADER output terminals

(Rear Panel i (vpage 4))

ø 3.5 mm stereo mini terminal

Others should not be affected a terminal short-

circuit.

Q3 Source input fader (Ch. fader)

Controls the level of the selected Input.

Q4 CROSSFADER ASSIGN switches

A, B:

The channel source is assigned to A or B of the

Crossfader.

THRU:

Select when you don’t assign the channel source

into the Crossfader.

Getting Started

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments