KeyMaster - - youryour codefree so
3.4 - Assembling the player.Assembling the player is done using the following procedure:Œ Just refit the topcover back on and secure it.3.5 - Finishin
1.1 - Players.These installation instructions covers the installation of the Key-Master for DVD players manufactured by:Denon DVD-1000ect.Please note:
2.1 - Disclaimer! Read this throroughly.Before installing the KeyMaster which is able to make your DVDplayer codefree, you should read through these w
3.1 - Removal of the top cover.Remember to disconnect the player from the mains before proce-ding. Remove the seven screws which holds the topcover, t
3.2 - Installing the KeyMaster.Seven wires have to be soldered onto the PCB board in the front,the last two has to be connected onto the powersupply a
3.2 - Conitiune (powersupply)...Connect the grey wire as shown in fig. 4.à Connect the grey wire onto R37 as shown.Remember to adjust the ends of the
3.2 - Conitiuned (SCART).To be able to switch between the YC and CBVS signals in the Scartconnector, you have to make a small change. The controlling
3.2 - Contiuned (SCART).It is very imponant that the purple wire is placed and tired togherwith the rest of the wires as shown on fig. 6 with cable ti
3.3 - Securing KeyMaster.Secure the KeyMaster as shown in fig. 7. Remove the protectionfilm from the double sided tape and press the KeyMaster thoroug
Comments to this Manuals