Denon DRA-F100 User Manual download pdf (Page 12)

ENGLISH

USING THE TIMER

The time and timer functions are incorporated in the receiver.

2 Types of timer operations

TIMER : Use this to turn the power on and off at the same times every day.

SLEEP TIMER : Use this to set the power to turn off after 10 to 60 minutes, in steps of 10 minutes (operated from the

remote control unit).

2 Notes on timer settings

• Be sure to set the current time beforehand.

• To listen to or record a radio program (”air check“) using the timer, be sure to preset the station beforehand. (Refer to

”Presetting AM and FM Stations“ on page 11.)

Timer Settings

Power Failures

Checking the Settings

Setting the Current Time

The Time is displayed in the 12-hour mode

Example: Setting to 7:30 p.m.

Should there be a power failure or should the power cord be unplugged, the time display will flash at ” “. If this

happens, reset the current time.

Also check the timer and tuner presettings, and reset them if they have been cleared.

To check the timer settings, press the TIMER button for at least 3 seconds. (This can also be done when the tuner’s

power is off.)

Next, press the MEMORY button repeatedly to display the timer start mode, the reception band and preset channel

number when in the tuner mode, the on time and the off time. Press the MEMORY button once more to return to the

current mode display.

Changing the Settings

Repeat the timer setting operation to erase the previous settings and set the new settings.

Clearing the Settings

Press the TIMER button for at least 3 seconds, then press it for at least 3 seconds again while ”FUNC“ is displayed to

clear the timer settings.

Note on Setting the Timer

If the time set with the timer is reached while the system power is on, the operation switches to the operation set by the

timer.

Turning the Timer Off

Press the TIMER button to turn the mark off.

PHONES

BASS

TREBLE

BALANCE

SYSTEM

REMOTE SENSOR

VOLUME

ON / STANDBY

PERSONAL COMPONENT SYSTEM / AM-FM STEREO RECEIVER DRA-F100

MHz

TUNED STEREO AUTO

TIMER

MONO /

STEREO

BAND

MEMORY

FUNCTION

DOWN

TUNING

TIMER

DISPLAY

2,4 1 3,5

Press the DISPLAY button for at

least 3 seconds.

DISPLAY

The hours place flashes.

The minutes place flashes.

The display stops flashing and

the clock starts running from

00 seconds.

(If the hours have already been set, that number flashes.)

Use the TUNING UP and DOWN

buttons to set the hours.

Press the MEMORY button.

(If the minutes have already been set, that number

flashes.)

Use the TUNING UP and DOWN

buttons to set the minutes.

Press the MEMORY button at the

sound of a time service’s chime.

The time display stops flashing and

the clock starts running.

• The current time can be set even when the power is off.

Receiver (DRA-F100)

MEMORY

DOWN

TUNING

DOWN

TUNING

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 53 54

Comments to this Manuals

No comments

Denon DRA-F100 User Manual Page 12

Comments to this Manuals

Related products and manuals for HiFi systems Denon DRA-F100