Denon CEOL Noir Owner's Manual Page 52

  • Download
  • Add to my manuals
  • Print
  • Page
    / 58
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 51
46
ENGLISH
GCDH
Symptom Cause Countermeasure Page
“Unsupported”
is shown on the
display even
though a CD is
loaded.
The disc is not properly loaded. Reload the disc. 3
Disc does not
play when 1/3
button is pressed.
The disc is dirty or scratched. Wipe the disc clean or replace
the disc.
3
A specifi c part
of a disc is not
played.
The disc is dirty or scratched. Wipe the disc clean or replace
the disc.
3
A CD-R or CD-RW
disc cannot be
played.
The disc has not been fi nalized.
The recording conditions are bad
or the quality of the disc itself
it poor.
Finalize the disc then play it.
Use a properly recorded disc.
3
MP3 and WMA
les cannot be
played.
• The le formats, extensions or
settings made when the disc
was created are not compatible
with this unit.
Create discs with fi le formats,
extensions or settings
compatible with this unit.
41
GTunerH
Symptom Cause Countermeasure Page
Continuous noise
is heard when
receiving FM
programs.
Antenna cable is not properly
connected.
Connect the antenna cable
properly.
Connect an outdoor antenna.
7
Hissing or
continuous noise
is heard when
receiving AM
programs.
This may be noise from a TV or
interference from a broadcast
station.
Turn off the TV.
Change the position and
direction of the AM loop
antenna.
7
The TV sound is
not output.
Other digital audio signals than
2 channel linear PCM cannot
be input through AUX IN 3
(OPTICAL) terminal of this unit.
When you try to input digital
audio signals other than 2
channel linear PCM to this unit,
set the digital audio output
setting of the TV to 2 channel
PCM.
For details, see the operating
instructions of the TV.
“No Network
Connection” is
displayed.
The network is not properly set
up.
Perform “Network First Setup.”
Select a source other than the
network function.
25
12
GRemote controlH
Symptom Cause Countermeasure Page
Set does not
work properly
when remote
control operated.
Batteries are worn.
You are operating outside of the
specifi ed range.
Obstacle between main unit and
remote control.
The batteries are not inserted
in the proper direction, as
indicated by the polarity marks
in the battery compartment.
The set’s remote control sensor
is exposed to strong light (direct
sunlight, fl uorescent light, etc.).
Replace with new batteries.
Operate within the specifi ed
range.
Remove the obstacle.
Insert the batteries in the
proper direction, following the
polarity marks in the battery
compartment.
Move the set to a place in which
the remote control sensor will
not be exposed to strong light.
4
4
4
4
1.RCDN7E2_ENG_5th_0831.indd 461.RCDN7E2_ENG_5th_0831.indd 46 2010/09/01 15:10:062010/09/01 15:10:06
Page view 51
1 2 ... 47 48 49 50 51 52 53 54 55 56 57 58

Comments to this Manuals

No comments