Denon AVR-890 User Manual Page 14
- Page / 76
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Getting Started Playback Remote Control Information Troubleshooting Specifications
ENGLISH
Multi-ZoneSettings
Protection circuit
If the core wires touch the rear panel and the screws
etc., or the ± sides touch each other, the protection
circuit will be activated and the power indicator will
flash red at intervals of 0.5 secs.
If the protection circuit is activated, the speaker
output is isolated, and the power supply goes to
the standby state. If the power supply is turned off,
after the power supply cord is withdrawn, please
confirm that speaker cable and input cable are
connected.
Also, if replaying large sound levels by using
a speaker having an impedance less than that
specified (eg, 4 Ω/ohms), the temperature will rise,
and the protection circuit might be activated. The
power supply will go into the standby state, and the
power indicator will flash red at 2 second intervals.
In this case, please switch off the power supply,
and wait until the AVR-890 has cooled down, and
the surrounding ventilation is good.
Even if there are no problems with the surrounding
ventilation and connections, in the event of the
protection circuit becoming activated, due to
thinking that the AVR-890 has failed, please contact
DENON Service center after switching off.
w q
w q w q
*/
(L) (R)
w qw q
(R) (L)
w qw q
(R) (L)
Subwoofer with
built-in amplifier
Center
speaker
Surround
speakers
Front speakers
A
Front speakers
B
For connections of the SURR. BACK/AMP
ASSIGN speaker terminals, see “Amp Assign”
(vpage 27).
Connecting the Speakers
s
Set the “Amp Assign” Mode According to the Speaker Layout
The signals output from the AVR-890’s SURR. BACK/AMP ASSIGN speaker terminals can be
switched to signals of the surround mode being used (vpage 27 “Amp Assign”).
Amp assign mode
(vpage 27)
SURR. BACK/AMP ASSIGN
Speaker connections
Example of speaker installation
Normal
Normal
Normal
Front Height
Front A Bi-Amp
or
Front B Bi-Amp
ZONE2
(Default)
MAIN ZONE ZONE2
Front Height
speakers
Surround back
speakers
Surround back
speakers
Not connected
Front A or B
speakers
b For connections, see
“About bi-amp connections”
(vpage 12).
(7.1)
(6.1)
(5.1)
(7.1)
(5.1)
(5.1)
(2)
b Connect to the “L” speaker
terminal.
b Set “S.Back” (vpage 28)
to “1spkr”.
b
Set the “S.Back” setting
(vpage 28) to “None”.
Installing/Setting the Speakers
ZONE2
speakers
Connections
- AV SURROUND RECEIVER 1
- IMPOTANT SAFETY 2
- INSTRUCTIONS 2
- ENGLISHFRANCAIS 3
- Contents 4
- Cautions on Handling 6
- Cautions on Installation 6
- About the Remote Control Unit 6
- Part Names and Functions 7
- Rear Panel 9
- Remote Control Unit 10
- Connections 11
- (Video Conversion Function) 12
- Installing All the Speakers 13
- When 6.1ch Connectedn 13
- When 5.1ch Connectedn 13
- Connecting the Speakers 14
- (R) (L) 15
- Connecting Devices not 16
- Equipped with HDMI terminals 16
- Playback Components 17
- Recording Components 18
- SAT/CABLE Tuner 19
- Other Devices 19
- Multi-ZoneSettings 20
- "69 21
- Once Connections are 22
- Completed 22
- Settings 23
- (Audyssey™ Auto Setup) 25
- Getting Started 27
- SpecificationsMulti-Zone 27
- See overleaf 27
- Check Audyssey Auto Setup 29
- Setting contents 30
- Speaker Confi g 30
- Multi-Zone 34
- Specifi cations 37
- Specifications 39
- Decoding mode (Input Mode) 40
- (Antenna Aiming) 42
- Playback 43
- Programs 45
- S R 00 0 S i ri u s I D 46
- * * ** * * * * ** * * 46
- S R 00 1 H i ts 1 46
- C A T : P op s 46
- Selecting the Surround Mode 47
- Surround Mode 48
- (Audio/Video Adjust) 49
- Adjust CH 53
- Base Curve Copy 53
- Checking the Status 54
- (Information) 54
- Convenient functions 55
- Adjust the Volume of the 56
- Different Speakers 56
- (Quick Select Function) 56
- Various Memory Functions 56
- "69 57
- Registering Preset Codes 58
- Operating Registered Devices 58
- Blu-ray Disc / DVD Player 59
- (Punch Through Function) 60
- Other Information 61
- DTS Surround 62
- Audyssey 62
- Surround Modes and Parameters 63
- Surround 64
- Troubleshooting 68
- MENU button on the 69
- MENU button on 69
- DEVICE SELECT : TV 72
- DEVICE SELECT : DVD/HDP 73
- DEVICE SELECT : DVR/VCR 73
- DEVICE SELECT : SAT/CBL 74
- DEVICE SELECT : CD 75
Related products and manuals for Home Theater Systems Denon AVR-890
(86 pages)
(2 pages)© 2020, manymanuals.com. All rights reserved. | 1.272 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals