Denon AVR-890 User Manual download pdf (Page 16)



ENGLISH

Getting Started Playback Remote Control Information Troubleshooting SpeciﬁcationsMulti-ZoneSettings

• Select the terminal to use and connect the device.

• For video connections, see “Converting input video signals for output

(Video Conversion Function)” (vpage 9).

7*%&0

$0.10/&/57*%&0

: 1# 13

7*%&0

"6%*0

015*$"-

065

47*%&0

Monitor (TV)

The component video connectors may be indicated differently on your

monitor. For details, see the monitor’s operating instructions.

Monitor (TV)

For instructions on HDMI connections, see “Connecting Devices

Equipped with HDMI terminals” on page 12.

Connecting devices

NOTE

• If the menu “HDMI Audio Out” setting (vpage 30) is set to

“Amp”, the sound may be interrupted when the monitor’s power is

turned off.

• The audio signal from the HDMI output terminal (sampling

frequency, number of channels, etc.) may be limited by the HDMI

audio speciﬁcations of the connected device regarding permissible

inputs.

• Use a cable on which the HDMI logo is indicated (a certiﬁed HDMI

product) for connection to the HDMI connector. Normal playback

may not be possible when using a cable other than one on which the

HDMI logo is indicated (a non-HDMI-certiﬁed product).

• When the AVR-890 is connected to other devices with HDMI cables,

also connect the AVR-890 and TV using an HDMI cable.

• When a device supporting Deep Color signal transfer is connected,

use a cable compatible with HDMI ver.1.3a.

• Video signals are not output if the input video signals do not match

the monitor’s resolution. In this case, switch the Blu-ray Disc player /

DVD player’s resolution to a resolution with which the monitor is

compatible.

The AVR-890 allows connection of inputs from up to 5 HDMI

devices and output to 1 TV.

065

)%.*

065

)%.*

065

)%.*

065

)%.*

065

)%.*

Blu-ray

Disc Player

Digital Video

Recorder

Monitor

(TV)

Connections

NOTE

• No sound is output when connected to a device equipped with a

DVI-D terminal. Also make the audio connections.

• Signals cannot be output to DVI-D devices that do not support

HDCP.

• Depending on the combination of devices, the video signals may not

be output.

n Connecting to a device equipped with a DVI-D

terminal

When an HDMI/DVI conversion cable (sold separately) is used, the

HDMI video signals are converted to DVI signals, allowing connection

to a device equipped with a DVI-D terminal.

NOTE

The audio signals output from the HDMI connectors are only the

HDMI input signals.

n Settings related to HDMI connections

Set as necessary. For details, see the respective reference pages.

Input Assign (vpage 35)

Set this when changing the input sources of the different terminals.

HDMI Setup (vpage 30)

Make these settings related to HDMI input/output signals.

• RGB Range

• Auto Lip Sync

• HDMI Audio Out

• HDMI Control

• Standby Source

• Power Off Control

Connecting Devices not

Equipped with HDMI terminals

Game

Console

SAT/CABLE

Tuner

DVD

Player

NOTE

When a device that does not support HDCP is connected, video

signals are not properly output.

n Copyright protection system (HDCP)

The AVR-890 supports HDCP (High-bandwidth Digital Contents

Protection). HDCP is a copyright protection technology for digital video

signals. The devices connected to the AVR-890 must also support

HDCP.

Connections

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 75 76

Comments to this Manuals

No comments

Denon AVR-890 User Manual Page 16

Comments to this Manuals

Related products and manuals for Home Theater Systems Denon AVR-890