Denon AVR-890 User Manual download pdf (Page 25)

ENGLISH

Getting Started

Connections Playback Remote Control Information Troubleshooting

Speciﬁ cationsMulti-Zone

The acoustic characteristics of the connected speakers and

listening room are measured and the optimum settings are made

automatically.

NOTE

• Loud test sounds may be played during Audyssey Auto Setup. This is

part of normal operation. If there is background noise in room, these

test signals will increase in volume.

• Do not stand between the speakers and setup microphone or allow

obstacles in the path while the measurements are being made. This

will cause inaccurate readings.

• Make the room as quiet as possible. Background noise can disrupt

the room measurements. Close windows, silence cell phones,

televisions, radios, air conditioners, ﬂ uorescent lights, home

appliances, light dimmers, or other devices as measurements may

be affected by these sounds.

Cell phones should be placed away from all audio electronics during

the measurement process as Radio Frequency Interference (RFI)

may cause measurement disruptions (even if the cell phone is not in

use).

Audyssey MultEQ

automatically measures the acoustical

problems in the listening environment to create the best audio

experience for your home theater.

• When Audyssey™ Auto Setup is performed, MultEQ

, Dynamic

EQ™ and Dynamic Volume™ functions (vpage 48) are enabled.

• Use the included setup microphone (DM-A409) to perform Audyssey

Auto Setup.

• Measurements are performed by placing the calibrated microphone

successively at multiple positions throughout the listening area as

shown in GExample qH. For best results, it is strongly recommended

to measure 6 positions so that the measurements have the proper

spatial weighting.

Even if the listening environment is small as shown in GExample wH,

measuring at multiple points throughout the listening environment

results in more effective correction.

n When using Front Height Speakers

GExample qH GExample wH

FHL FL SW C FR FHR

SL SR

FHL FL SW C FR FHR

SL SR

n When using Surround Back Speakers

GExample qH GExample wH

FL SW C FR

SL SR

SBRSBL

FL SW C FR

SL SR

SBRSBL

( : Measuring positions)

Important Information

About the main listening position (*M)

The main listening position refers to the most central position where

one would normally sit within the listening environment.

MultEQ uses the measurements from this position to calculate

speaker distance, level, polarity, and the optimum crossover value

for the subwoofer.

FHL : Front height speaker (L)

FL : Front speaker (L)

SW : Subwoofer

C : Center speaker

FR : Front speaker (R)

FHR : Front height speaker (R)

SR : Surround speaker (R)

SBR : Surround back speaker (R)

SBL : Surround back speaker (L)

SL : Surround speaker (L)

( : Measuring positions)

n Check Audyssey Auto Setup Measurement

Results (Parameter Check) (vpage 26)

Audyssey Auto Setup Flown

Step 1 : Connect the included Setup

Microphone (vpage 23)

Step 3 : Performing the Audyssey Auto Setup

Procedure (vpage 24)

Step 2 : Audyssey Auto Setup Preparations

(vpage 23)

n Changing the ampliﬁ er assignment (Amp Assign)

(vpage 23)

n Set the channel to be measured (Channel Select)

(vpage 24)

Making the Optimum Settings for the Connected Speakers Automatically

(Audyssey™ Auto Setup)

Settings

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 75 76

Comments to this Manuals

No comments

Denon AVR-890 User Manual Page 25

Comments to this Manuals

Related products and manuals for Home Theater Systems Denon AVR-890