Denon AVR-890 User Manual download pdf (Page 38)



Getting Started Connections Playback Remote Control Information Troubleshooting Speciﬁcations

ENGLISH

Multi-Zone

Setting items Setting contents

Input Assign (HDMI)

Assign input sources to input

connectors.

HDMI

The

DVD

HDP

SAT/CBL

VCR

DVR

V.AUX

input

sources are assigned to the HDMI input terminals as shown below.

HDMI1 / HDMI2 / HDMI3 / HDMI4 / HDMI5

None : Do not assign an HDMI input terminal to the currently selected

input source.

b Upon purchase, the settings of the different input sources are as shown

below.

Input

source

DVD HDP TV SAT/CBL VCR DVR V.AUX

Default

setting

HDMI1 HDMI2 None HDMI3 None HDMI4 HDMI5

• When HDMI is assigned to an input source, the audio signal switches

to HDMI along with the video signal. To use with the digital audio

input connectors assigned, set menu “Input Mode” (vpage 37) to

“Digital”.

• When the AVR-890 and TV are connected with an HDMI cable, if the

TV is not compatible with HDMI audio signal playback, only the video

signals are output to the monitor.

• The audio signals input from the analog, digital and EXT. IN connectors

are not output to the TV.

NOTE

When “HDMI Control” is set to “ON”, HDMI cannot be assigned to “TV”

at the “HDMI” settings (vpage 30).

•

Input Assign (Digital)

Assign input sources to input

connectors.

Digital : The

DVD

HDP

SAT/CBL

VCR

DVR

V.AUX

SIRIUS

input sources are assigned to the digital audio input terminals as

shown below.

Coax1 / Coax2 / Opt1 / Opt2 / Opt3

None : Do not assign a digital input terminal to the currently selected

input source.

b Upon purchase, the settings of the different input sources are as shown

below.

Input source

DVD HDP TV SAT/CBL VCR

Default setting Coax1 None Opt1 Coax2 None

Input source

DVR V.AUX CD SIRIUS

Default setting Opt2 Opt3 None None

•

Making the input settings (Input Setup)

Setting items Setting contents

Input Assign (Component)

Assign input sources to input

connectors.

Component : The

DVD

HDP

SAT/CBL

VCR

DVR

V.AUX

input sources are assigned to the component video input terminals as

shown below.

1-RCA (Component video 1 input terminal) / 2-RCA (Component video

2 input terminal)

None

: Do not assign the component video input terminals to the currently

selected input source.

bUpon purchase, the settings of the different input sources are as shown

below.

Input

source

DVD HDP TV SAT/CBL VCR DVR V.AUX

Default

setting

1-RCA None None None None 2-RCA None

•

iPod Dock

Change the input source to

which the control dock for

iPod is assigned.

The control dock for iPod can be assigned to the

DVD

SAT/CBL

VCR

DVR

V.AUX

input sources.

Assign

: Assign the currently selected input source to the Control Dock for

iPod input.

None

: Do not assign the currently selected input source to the Control Dock

for iPod input.

• With the default settings, the control dock for iPod can be used

connected to the VCR (iPod) connector.

• Even if “iPod Dock” is set to “Input Assign”, if AVR-890 and control

dock for iPod are not connected, the input is used as the normal input

source.

Changing the Input Sources Assigned to the

Input Terminals (Input Assign)

Default settings are underlined.

: Moves the cursor (Up/Down/Left/Right)

: Decision the setting

: Return to previous menu

Remote control

operation buttons

Displaying the menu

Cancel the menu

Settings

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 75 76

Comments to this Manuals

No comments

Denon AVR-890 User Manual Page 38

Comments to this Manuals

Related products and manuals for Home Theater Systems Denon AVR-890