Denon AVR-890 User Manual download pdf (Page 40)



Getting Started Connections Playback Remote Control Information Troubleshooting Speciﬁcations

ENGLISH

Multi-Zone

Making the input settings (Input Setup)

Setting items Setting contents

Decode Mode

Set the input source’s

decoding mode.

Auto : Detect type of digital input signal and decode and play

automatically.

PCM : Decode and play only PCM input signals.

DTS : Decode and play only DTS input signals.

• This can be set for input sources for which “HDMI” or “Digital” is

assigned at “Input Assign” (vpage 35).

• Normally set this to “Auto”.

Setting items Setting contents

Rename

Change the input source’s

display name to the desired

name.

1. Use

o p to set the cursor to the character you want to change.

2. Use ui to change the character, then press .

Up to 8 characters can be input.

The input character type can be switched by pressing while the

display name is being changed.

• The types of characters that can be input are as shown below.

GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ

GLower case charactersH abcdefghijklmnopqrstuvwxyz

GSymbolsH ! “ # $ % & ‘ ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜

GNumbersH 0123456789 (Space)

•

Default

The changed display names

are reset to the defaults.

Yes : Reset to the defaults.

No : Do not reset to the defaults.

Changing the Input Source’s Display Name (Rename)

Default settings are underlined.

Use this procedure to change the display name of the currently selected input source.

: Moves the cursor (Up/Down/Left/Right)

: Decision the setting

: Return to previous menu

Remote control

operation buttons

Displaying the menu

Cancel the menu

Settings

Setting items Setting contents

Input Mode

Set the audio input modes for

the different input sources.

Auto : Automatically detect input signal and perform playback.

HDMI : Play only signals from HDMI input. (Excluding CD and SIRIUS)

Digital : Play only signals from digital input.

Analog : Play only signals from analog input.

EXT. IN : Play only signals from EXT. IN input.

b Upon purchase, the settings of the different input sources are as shown

below.

Input

source

DVD HDP TV SAT/CBL VCR

Default

setting

Auto HDMI Digital Auto Analog

Input

source

DVR V.AUX CD TUNER

Default

setting

Auto Auto Analog Analog

• The “HDMI” settings are made for input sources for which HDMI

input terminals are assigned at “Input Assign” (vpage 35).

• The “Digital” settings are made for input sources for which digital

input terminals are assigned at “Input Assign” (vpage 35).

•

When a digital signal is properly input, the “ ” indicator lights on

the display. If the “ ” indicator does not light, check the digital

input connector assignment and the connections.

• The surround mode cannot be set if the input mode is set to “EXT.

IN”.

•

This can also be set by pressing .

Each time you press the button, the input mode display will change.

Auto HDMI Digital

AnalogEXT. IN

The selectable input modes depend on the input source and “Input Assign” setting (vpage 35

“Changing the input sources assigned to the input terminals”).

Changing the Input Source’s Input Mode and

Decoding mode (Input Mode)

Default settings are underlined.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 75 76

Comments to this Manuals

No comments

Denon AVR-890 User Manual Page 40

Comments to this Manuals

Related products and manuals for Home Theater Systems Denon AVR-890