Denon AVR-890 User Manual download pdf (Page 69)



Getting Started

Connections Playback Remote Control Information

Speciﬁcations

ENGLISH

Multi-ZoneSettings

Symptom Cause Countermeasure Page

Dolby TrueHD,

DTS-HD, Dolby

Digital Plus audio

is not output.

• HDMI is not connected.

• Blu-ray Disc player’s audio output

setting is not set to bitstream.

• Blu-ray Disc player is not

compatible with DTS sound

playback.

• Connect the HDMI.

• Set the Blu-ray Disc player. For

details, refer to the Blu-ray Disc

player’s operating instructions.

• Use a DTS-compatible player.

–

Symptom Cause Countermeasure Page

No sound is

produced from

center speaker.

• You are playing a monaural source

(TV, etc.) in the “STANDARD”

(Dolby/DTS Surround) mode.

• The mode is set to something

other than “STANDARD” (Dolby/

DTS Surround).

No sound

is produced

from surround

speakers.

• The surround mode is set to

“STEREO”, “DIRECT” or “PURE

DIRECT”.

• Set to a surround playback

mode.

45, 46

No sound is

produced from

surround back

speaker.

• The surround back speaker’s

power ampliﬁer is assigned to a

different channel.

• “S.Back” setting is set to

“None”.

• The “Audio/Video Adjust”

– “Audio Adjust” – “Surround

Back” settings are “OFF”.

• Surround mode not set to a mode

for 6.1- or 7.1-channel playback.

• Check the setting and change it

as necessary.

• Set to something other than

“None”.

• Please set “Audio/Video Adjust”

– “Audio Adjust” – “Surround

Back” to settings other than

“OFF”.

• Select a surround playback

mode.

No sound is

produced from

subwoofer.

• Subwoofer’s power not turned

on.

• The “Subwoofer” setting at

“Speaker Conﬁg.” is set to “No”.

• The subwoofer is not properly

connected.

• The subwoofer’s volume is

turned off.

• Turn on the subwoofer’s power.

• Set to “Yes”.

• Check the connections.

• Adjust the subwoofer’s volume

to an appropriate level.

–

DTS sound is not

output.

• Blu-ray Disc player / DVD player’s

audio output setting is not set to

bitstream.

• Blu-ray Disc player / DVD player is

not compatible with DTS sound

playback.

• The AVR-890’s “Decode Mode”

setting is set to “PCM”.

• Set the Blu-ray Disc player / DVD

player. For details, refer to the

Blu-ray Disc player / DVD player’s

operating instructions.

• Use a DTS-compatible player.

• Set to the “Auto” or “DTS”

mode.

–

HDMI audio

signals are not

output from

speakers.

• The “Manual Setup” – “HDMI

Setup” – “HDMI Audio Out”

setting is set to “TV”.

• Set to “Amp”. 30

No sound is

output from

the monitor

connected

with HDMI

connections.

• The “Manual Setup” – “HDMI

Setup” – “HDMI Audio Out”

setting is set to “Amp”.

• Set to “TV”. 30

GAudioH

Troubleshooting

Symptom Cause Countermeasure Page

No picture

appears.

• The connections between the

AVR-890 and monitor are faulty.

• The monitor’s input setting is

wrong.

• PURE DIRECT mode is set.

• The player is connected using

the component input connectors,

the monitor is connected

using the video (yellow) output

connectors.

• Check the connections.

• Set properly.

• Cancel the PURE DIRECT mode.

• High deﬁnition (1080i/720p) and

progressive (480p/576p) video

signals are not down-converted.

Set the player to interlace

(480i/576i) signals.

12 ~ 16

–

Picture cannot be

recorded.

• Input source does not match

recorder’s video connection

connector (video).

• The video conversion function

does not work for the REC

OUT connectors. Match the

input source and recorder

connections.

DVDs cannot be

copied on a DVR.

–

• This is not a malfunction. Most

movie software includes copy

prevention signals and cannot be

copied.

–

The menu screen

and status

indicators are not

displayed.

• “OFF” is displayed for the

status.

• The main volume display is

“OFF”.

• The display during tuner operation

is “OFF”.

• The display during iPod operation

is “OFF”.

• When viewing HDMI or

component video signals via the

AVR-890, the GUI menu appears

when the MENU button on the

main unit or the MENU button on

the remote control unit.

• Set “Manual Setup” – “Option

Setup” – “GUI” – “Text” to

“ON”.

• Set “Manual Setup” – “Option

Setup” – “GUI” – “Master

Volume” to “Top” or “Bottom”.

• Set when “Manual Setup” –

“GUI ” – “Tuner Information” is

not “OFF”.

• Set when “Manual Setup”

– “GUI” – “ iPod Information” is

not “OFF”.

GVideoH

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 75 76

Comments to this Manuals

No comments

Denon AVR-890 User Manual Page 69

Comments to this Manuals

Related products and manuals for Home Theater Systems Denon AVR-890