Denon Cocoon Owner's Manual Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 39
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
20
Setting up the network
(Network Info.)
Checking the network information
1
Press and hold for more than
3 seconds.
Settings
2
Press + or to select “Network
Info.”, then press 13.
Network Info.
3
Press + or to select the item you want to check, then
press 13.
•You can check the following items:
Friendly Name (Cocoon Home) / DHCP/
IP Address / Primary DNS / Secondary DNS / MAC Address
n Exiting the menu to return to the normal mode
Press until the input source is displayed.
•The unit exits the setting mode and the normal display returns.
To return to the previous item, use + or to select “Back” and then
press 13, or press .
n Exiting the menu to return to the normal mode
Press until the input source is displayed.
•The unit exits the setting mode and the normal display returns.
To return to the previous item, use + or to select “Back” and then
press 13, or press .
n Notes concerning use of “Firmware Update”
•Do not turn off the power until updating or upgrading is completed.
•Even with a broadband connection to the Internet, approximately
20 minutes is required for the updating procedure to be
completed.
•Once updating starts, normal operations on this unit cannot be
performed until updating is completed.
•If the update fails, remove and re-insert the power cord. “Update
Retry” appears on the display and update restarts from the point
at which update failed. If the error continues despite this, check
the network environment.
See the Denon website for details about updates.
Firmware Update
•This function requires the Internet connection (vpage8).
•When the latest firmware is available, “ ” is displayed.
•Perform the firmware update operation only after at least 2 minutes
has elapsed since turning this unit’s power ON.
NOTE
If this unit is updated, the menu settings and preset internet radio
stations will be reset to the default settings.
1
Press and hold for more than
3 seconds.
Settings
2
Press + or to select “Firmware
Update”, then press 13.
Firmware Update
3
Press + or to select “Check for Update”, then press
13.
Check for Update
Check for firmware updates.
Use
+ or to select the item, and press 13.
•No update available: The unit already has the latest firmware.
•Update Now: Updates to the latest firmware.
•Update Later: Updates the latest firmware at a later date.
•If updating fails, the set automatically retries, but if updating is still
not possible, one of the messages shown below is displayed. If
the display reads as shown below, check the settings and network
environment, then update again.
Display Description
Updating fail Updating failed.
Login failed Failure to log into server.
Server is busy Server is busy. Wait a while then try again.
Connection fail Failure in connecting to server.
Download fail Downloading of the firmware has failed.
Preparation
Operation
Information
Operation
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 38 39

Comments to this Manuals

No comments