Denon DN-HD2500 User Manual download pdf (Page 16)

ENGLISH

• Each push of the PLAY/PAUSE button

switches between playback and

pause. PLAY/PAUSE button

illuminates solid green during

playback and flashes in pause.

• When the PLAY/PAUSE button is pushed during play,

the DN-HD2500 pauses playback at that point. Push

PLAY/PAUSE button once again and playback resumes.

• Playback will pause when SCRATCH

is selected with the JOG MODE

button and the JOG disc is held with

your hand. Playback resumes when

your hand is released.

BASIC OPERATION

Play and pause

Push the PITCH/KEY button to

PITCH indicator lights up.

• PITCH → KEY (key adjust) →

OFF

NOTE:

The display will indicate “KEY”, when key adjust is

ON.

Move the Pitch Slider to adjust the

pitch. The current pitch setting is

displayed on the display.

Pitch decreases

Pitch increases

• When the CUE button is pushed

during playback, the file stops and

returns to the original position of

which playback started from, the (Cue

point). This function is also called

Back-Cue. With the Back-Cue function, you can start

from exactly same position. The CUE button illuminates

solid red when DN-HD2500 is ready to start playback.

•You can set and change Cue point as follows.

• When you started playback.

• File select finished.

• Manual search.

Play and Cue

• If you would like to start playback other from the

beginning of the file, you need to move Cue Point using

fast Search, scan and manual search function.

•With Pitch slider you can adjust the playback speed

(Pitch).

• If you would not prefer to change key of sound, use the

Key Adjust function.

Adjusting the pitch

DN-HD2500 has six pitch ranges,

4 %, 10 %, 16 %, 24 %, 50 %

and 100%

When the RANGE

button is pushed for more than 1

sec, the pitch range can be

selected with the

PARAMETERS knob.

• When the PARAMETERS

knob is pushed the pitch

range is entered and the

pitch range selection mode is cancelled.

•With PITCH BEND function you can change pitch

temporary. DN-HD2500 has two ways for this function

PITCH BEND buttons and JOG disc.

Pitch Bend

[PITCH BEND +/– buttons]

• Push the PITCH BEND

button for momentary

change of pitch.

While holding these buttons

down, the pitch continues to change up to the

limitation.

• After releasing the PITCH BEND buttons,

playback pitch returns to slider setting.

•Turn the PARAMETERS knob or

JOG disc.

Select the file

Move the Cue point

Power on play

• When “POWER ON PLAY” is set to “ON” at

⁄5

PRESET “(10) Power On Play”, playback starts from

the first file on the “Favorites” when the power is

turned on.

[JOG disc]

• When the JOG mode is set to

SEARCH/BEND with the JOG

MODE button, the playback

speed can be changed by turning

JOG disc during playback.

After you found your preferred

Cue point, push the CUE button

then a new Cue point is set.

Push the JOG MODE button to

set JOG disc to search mode.

The JOG MODE button will

turn off.

Turn the JOG disc to change Cue

point. You can hear the short

sound of the current Cue point.

When JOG disc is turned in the

pause, Cue or frame repeat mode,

it works as the manual search function.

You can move to the

approximate playback start

position by FAST SEARCH

buttons.

[QUICK JUMP]

• If the FAST SEARCH button is tapped shortly,

the playback position jumps about 10 seconds.

The jump time can be selected in the preset

mode from 10, 20, 30 or 60 sec.

[FAST SEARCH]

• When the FAST SEARCH button is pressed

and held in, the file/Track is fast-searched.

ENGLISH

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 29 30

Comments to this Manuals

No comments

Denon DN-HD2500 User Manual Page 16

Comments to this Manuals