Denon DN-X800 User Manual download pdf (Page 5)

ENGLISH

@0 RESET switch

• Returns to initial settings when this switch is pressed.

@1 HEADPHONE output jack

• Accepts 1/4” stereo headphone plugs.

@2 HEADPHONE level control

• Adjusts the volume for the headphones.

@3 HEADPHONE mode button

• In the STEREO mode, this button feeds STEREO

Program and Cue to both earcups, in the MONO

mode, the Headphone circuit provides MONO Cue to

the left ear and MONO Program to the right.

• In the STEREO mode, the meter indicates the stereo

level in the LEFT and RIGHT Main Outputs. In the

MONO mode, mono CUE level is displayed on the

Left meter and mono PROGRAM level is displayed on

the Right meter.

• In the MONO mode, the adjacent green indicator

lights.

@4 HEADPHONE PAN control

• Serves two purposes…In the STEREO mode it

changes the relative levels of the Cue and Program

mixed together in both earcups. In the MONO mode it

changes the balance between the Mono Cue in the

left ear cup and the Mono Program in the right.

@5 CUE buttons

• Pressing in any or all of the CUE buttons routes the

respective Source to the Headphone and Meter Cue

sections. Pressing multiple buttons makes it possible

to derive mixed sound from the selected sources. The

adjacent red indicator illuminates when the button is

depressed.

@6 CROSSFADE ASSIGN A, B switches

• Assigns the Crossfader to any of the four Input

Channels and Off.

OFF

Select when not using the crossfader.

1 to 4

Select what channels (CH-1 to CH-4) to assign to A

and B.

Channels not assigned to A or B are output without

passing through the crossfader.

@7 CROSSFADER

• Controls the relative output level from the summed A

and B Mixes. When the fader is at its far left, only the

A Mix is heard from the Outputs. As the fader is

moved toward the right, the amount of B Mix is

increased and the amount of A Mix is decreased.

When the fader is centered, equal amounts of A and B

Mixes are routed to the Outputs. Fully right is all B Mix

at the Outputs.

@8 CROSSFADER CONTOUR control

• Allows adjusting the “shape” of the Crossfader

response from a gentle curve for smooth, long running

fades, to the steep pitch required for top performance

cut and scratch effects.

@9 CROSSFADER START A, B buttons

• The function to start the performance of CD Player

with Crossfader automatically is turned on/off.

• When the button is pressed in, the Crossfader Start is

on and the adjacent orange indicator lights.

#0 X-EFFECT function buttons

• The Fader Start is executed by connecting the

Expansion Jack of the RC of the DN-2100F and the

DN-2600F, the item that is executed by Crossfader

and Ch. fader are selected by the button in each Ch..

It is not possible to use when the RC is not connected.

SAMP. buttons

This function will start the Sampler of the DN-2600F

by using Crossfader and Ch. fader are turned on/off.

H/S BRAKE buttons

This button provides 2 functions, Brake and Platter-S.

You first need to load a Hot Start(s) to activate this

feature.

By pressing either H/S Brake button once, will activate

H/S Brake mode (orange indicator is lit) .

By pressing the same button once more, this will

activate H/S Platter-S mode (indicator is flashing).

A third press will turn this function OFF.

See “X-EFFECT” to use this feature on page 8.

H/S 1, 2 buttons

This function will start the Hot Start of the DN-2100F

and the DN-2600F by using Crossfader and Ch. fader

are turned on/off.

#1 CH. FADER START switches

• This function will start the performance of CD Player

with Ch. fader automatically is turned on/off.

#2 POWER indicator

• When the red indicator is lit, the DN-X800 is ready to

go.

(2) Rear Panel

#3 POWER switch

• Press the switch to turn the power on.

#4 MAIN OUT (BALANCED) connectors

• These XLR type connectors provide a balanced line

level output.

• Connect these connectors to the balanced analog

input connectors on an amplifier or console.

• Pin layout 1. Common 2. Hot 3. Cold

• Applicable connector: Cannon XLR-3-31 or equivalent.

NOTE:

Do not short-circuit the hot or cold pin with the common

pin.

#5 MAIN OUT (UNBALANCED) jacks

• This stereo pair of RCA jacks provide a unbalanced line

level output.

• Connect these jacks to the unbalanced analog input

jacks on an amplifier or console.

#6 DIGITAL OUT 1, 2 jacks

• These RCA jacks provide a digital output data. The

signal is unaffected by the Master Level fader. Output

is controlled by Ch. fader volume.

• We recommend using a 75Ω/ohm RCA cord for best

digital transfer. (available from any audio/video retailer)

#7 ZONE OUT (BALANCED) connectors

• These XLR type connectors provide a balanced line

level output with independent front panel Zone Level

controls and are not affected by the Master Level

control.

• Connect these connectors to the balanced analog

input connectors on an amplifier or console.

• Pin layout 1. Common 2. Hot 3. Cold

• Applicable connector: Cannon XLR-3-31 or equivalent.

NOTE:

Do not short-circuit the hot or cold pin with the common

pin.

#8 BOOTH OUT jacks

• This stereo pair of RCA jacks provide a unbalanced line

level output with independent front panel Booth Level

controls and are not affected by the Master Level

control.

• Connect these jacks to the unbalanced analog input

jacks on an amplifier or console.

#9 X-EFFECTS JACK

• Connect this jack to the remote of the DN-2100F and

the DN-2600F using the 3.5 mm stereo mini cord.

$0 SUBWOOFER output jack

• This 1/4” mono jacks provide a mono line level output

of Main Out. The signal is affected by the Master

Level fader.

• Connect this jacks to the subwoofer input jack on an

amplifier.

$1 TAPE OUT jacks

• This stereo pair of RCA jacks provide a line level

output. The signal is unaffected by the Master Level

fader. Output is controlled by Ch. fader volume.

• It is intended for use with a tape recorder, but is not

restricted to that purpose. Output is controlled by Ch.

fader volume.

$2 EFFECT jacks

• These 1/4” stereo jacks allow stereo external

processing of the Program signal.

• These are switching jacks --- always complete the loop

when connecting a send and return, or no sound will

be heard.

$3 DIGITAL 1, 2, 3, 4 input jacks

• These RCA jacks are Inputs for any digital output

device.

• We recommend using a 75Ω/ohm RCA cord for best

digital transfer. (available from any audio/video retailer)

$4 LINE 2, 4, 6, 7, 8 input jacks

• These stereo pairs of unbalanced RCA jacks are Inputs

for any line level device.

$5 Ch 3, 4 FADER output jacks

• Connect these jacks to the Fader input jacks of the

DN-1800F, the DN-2100F and the DN-2600F using the

3.5 mm stereo mini cord.

$6 PHONO 1, 2, 3 / LINE 1, 3, 5 input jacks

• These stereo pairs of unbalanced RCA jacks are Inputs

for a Phono (RIAA) stage for magnetic (MM) cartridges

or a Line stage suitable for any device, such as a CD

player.

$7 PHONO 1, 2, 3 / LINE 1, 3, 5 switches

• These switches change the Input from Phono to a

Line level inputs.

• These switches set a Line level inputs when Turntable

is not connected.

$8 Phono Ground screw

• This screws provide a place to connect the ground

wire from a turntable.

This terminal is exclusively for a turntable grounding

and not a safety earth ground.

$9 MAIN MIC input connector

• Neutrik combo jack.

• Accepts either a balanced microphone with an XLR

connector or an unbalanced microphone with 1/4”

mono jacks.

%0 AUX MIC input jack

• Accepts an unbalanced microphone with 1/4” mono

jacks.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Comments to this Manuals

No comments

Denon DN-X800 User Manual Page 5

Comments to this Manuals

Related products and manuals for Musical Instruments Denon DN-X800