Denon DN-700R Owner's Manual Page 77

  • Download
  • Add to my manuals
  • Print
  • Page
    / 119
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 76
Part names and
Functions
Setting defaultsConnections Playback
Selecting
Files and
Folders
Getting Started
Information
71
Selecting
Media
Recording Edit Function
Control
Function
Serial remote control function
In the serial remote control function, a host such as a computer is connected to the unit. By sending control commands from the host to the unit, the unit can be operated, and the status information of the unit can be
checked both on the unit and host. There are 2 methods for connecting the host and unit, RS-232C control and IP Control.
RS-232C control
You will be able to perform the three control functions from the
host by connecting an RS-232C straight cable to the RS-232C serial
terminal (9-pin D-sub) connector.
GThree control functionsH
q
Controlling the DN-700R externally
w Sending the status information to the host when DN-700R
receives a status request command from the host
e Automatically sending the status information to the host
when there is a change to the DN-700R status
n About Connections
•Transmission System: Asynchronous full duplex transmission
•Compatible connector: 9-pin D-sub (male)
•Communication speed: 9,600/38,400 bps selectable (System
Setting: Serial Bit Rate)
•Data bit: 8 bit
•Parity: None
•Start bit: 1 bit
•Stop bit: 1 bit
•Flow control: None
Pin arrangement
Pin number Signal name
1 Ground
6 NC
2 TxD
7
RTS
z
3 RxD
8 NC
4 NC
9 NC
5 S. Ground
z 4V/500mA power supply can be used for RTS.
n Connections
REMOTE
RS-232C
PARALLEL
RS-232C Straight cable
IP control (Ethernet)
You will be able to perform the three control functions from the host
by connecting an Ethernet cable to the Ethernet connector.
(Connector type:RJ-45 (10BASE-T/100BASE-TX)
n Communication format
•Communication system: A full duplex
•Communication speed: 10 Mbps/100 Mbps
•Communication port: TCP port 23 (telnet)
•Communication data length: 135 bytes (maximum)
n Connections
q Connecting the unit and host directly
DIGITAL OUTPUT LAN REMOTE
RS-232C PARALLEL
Host
Ethernet cross
cable
w Connecting the unit and host via a Switch/Router
DIGITAL OUTPUT LAN REMOTE
RS-232C PARALLEL
Ethernet straight
cable
Ethernet straight
cable
Host
Switch/Router
Page view 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 118 119

Comments to this Manuals

No comments