Denon AVR-3805S Operations Instructions download pdf

ENGLISH

TER

• Point the remote control unit at the remote sensor

on the main unit as shown on the diagram.

• The remote control unit can be used from a straight

distance of approximately 7 meters from the main

unit, but this distance will be shorter if there are

obstacles in the way or if the remote control unit is

not pointed directly at the remote sensor.

• The remote control unit can be operated at a

horizontal angle of up to 30 degrees with respect to

the remote sensor.

NOTES:

• It may be difficult to operate the remote control

unit if the remote sensor is exposed to direct

sunlight or strong artificial light.

• Do not press buttons on the main unit and remote

control unit simultaneously. Doing so may result in

malfunction.

• Neon signs or other devices emitting pulse-type

noise nearby may result in malfunction, so keep

the set as far away from such devices as possible.

Approx. 7 m

30°

Using the remote control unit

REMOTE CONTROL UNIT

• The included remote control unit (RC-970) can be used to operate not only the AVR-3805 but other remote

control compatible DENON components as well. In addition, the memory contains the control signals for

other remote control units, so it can be used to operate non-DENON remote control compatible products.

Inserting the batteries

q Remove the remote control unit’s rear cover.

w Set three R03/AAA batteries in the battery

compartment in the indicated direction.

e Put the rear cover back on.

Notes on Batteries

• Use R03/AAA batteries in the remote control unit.

• The batteries should be replaced with new ones

approximately once a year, though this depends on

the frequency of usage.

• Even if less than a year has passed, replace the

batteries with new ones if the set does not operate

even when the remote control unit is operated

nearby the set. (The included battery is only for

verifying operation. Replace it with a new battery as

soon as possible.)

• When inserting the batteries, be sure to do so in the

proper direction, following the “≈” and “√” marks

in the battery compartment.

• To prevent damage or leakage of battery fluid:

• Do not use a new battery together with an old

one.

• Do not use two different types of batteries.

• Do not short-circuit, disassemble, heat or

dispose of batteries in flames.

• Remove the batteries from the remote control unit

when you do not plan to use it for an extended

period of time.

• If the battery fluid should leak, carefully wipe the

fluid off the inside of the battery compartment and

insert new batteries.

• When replacing the batteries, have the new

batteries ready and insert them as quickly as

possible.

Operating DENON audio components

Use the mode selector buttons to select the component you want

to operate.

The function switches as shown below each time one of the

mode buttons is pressed.

AMP/TUNER : AMP, TUNER

ZONE2/ZONE3 : ZONE2, ZONE3

TAPE/MD : TAPE, MD

CD/CDR : CD, CDR

TV/DBS/CABLE : TV, DBS, CABLE

VCR1/VCR2 : VCR1,VCR2

VDP : VDP

DVD/DVDR : DVD,DVDR

Example: Select “AMP” mode. Select “TUNER” mode.

Operate the audio component.

• For details, refer to the component’s operating instructions.

It may not be possible to operate some models.

[SOURCE MENU]

• Operate the source.

[SURROUND MENU]

• Operate the surround mode.

[10KEY / SYSTEM CALL MENU]

• Operate the 10KEY or SYSTEM CALL mode.

1. CD player (CD) system buttons

6, 7 : Manual search (forward and reverse)

2 :Stop

1 : Play

8, 9 : Auto search (to beginning of track)

3 : Pause

DISC SKIP + : (for CD changers only)

0~9, +10 : 10 Key

1 2 3 4 5 6 7 8 9 10

Summary of Contents

Page 1 - REMOTE CONTROL UNIT

30ENGLISHCH SELENTER• Point the remote control unit at the remote sensoron the main unit as shown on the diagram.• The remote control unit can be used

Page 2 - Preset memory

Page 3

31ENGLISH4. Tuner system buttonsTUNING +, – : Tuning up/downBAND : Switch between AMand FM bandsMODE : Switch between AUTOand MANUALMEMORY : Preset me

Page 4 - System call

32ENGLISHOperating a component stored in the preset memory1Press the mode selector button for thecomponent you want to operate.1NOTE:• For the DVD pla

Page 5 - Setting the brightness

33ENGLISHIf your AV component is not a DENON product or if it cannot be operated using the preset memory, it can becontrolled with the accessorious re

Page 6 - Resetting

34ENGLISHNOTES:• The remote control signals of the buttons pressed while registering the system call signals are emitted, sobe careful not to operate

Page 7

35ENGLISHResetting(1) Resetting the preset memory1Press the power ON button and the OFF buttonat the same time.2Press the “6” button to select Resetti

Page 8

Page 9

Page 10