Denon AVR-4810 User Manual

- 1 - DENON AVR control protocol Ver.6.6.0 Application model : AVR-4810CI/AVR-4810 Application terminal: RS-232C/ Ethernet Rev 6.6.0 Connector sp

- 10 - COMMAND PARAMETER function example SD AUTO set AUTO mode (Priority:HDMI>>DIGITAL>>ANALOG) SDAUTO<CR> HDMI set force H

- 11 - COMMAND PARAMETER function example MS DIRECT Select SURROUND mode MSDIRECT<CR> PURE DIRECT MSPURE DIRECT<CR> STER

- 12 - COMMAND PARAMETER function example VS MONIAUTO Set HDMI MONITOR automatic detection VSMONIAUTO<CR> MONI1 Set HDMI MONITOR OU

- 13 - COMMAND PARAMETER function example PS TONE CTRL OFF PARAMETER setting PSTONE CTRL OFF<CR> TONE CTRL ON TONE CONTROL ON/OFF PSTONE

- 14 - COMMAND PARAMETER function example PS REFLEV 0 Reference Level Offset=0dB PSREFLEV 0<CR> REFLEV 5 Reference Level Offset=5dB PSREFL

- 15 - COMMAND PARAMETER function example PS BAS UP BASS UP/DOWN , direct change to **dB PSBAS UP<CR> BAS DOWN **:00 to 99 by ASCII

- 16 - COMMAND PARAMETER function example PS AFD ON AFDM ON/OFF PSAFD ON<CR> AFD OFF PSAFD OFF<CR> AFD ? Return PSAFD

- 17 - COMMAND PARAMETER function example PS RSTR OFF AUDIO RESTORER direct change PSRSTR OFF<CR> RSTR MODE1 PSRSTR MODE1<CR&g

- 18 - Z2、Z2CV COMMAND : "*" parameter uses two ASCII characters. (see page6 J) section) COMMAND PARAMETER function example Z2 PHONO

- 19 - Z2 COMMAND : "*" parameter uses two ASCII characters. (see page6 J) section) COMMAND PARAMETER function example Z2PS BAS UP Z

- 2 - Ⅱ. Ethernet Connector type ： RJ-45(10BASE-T/100BASE-TX) Communication format ： Communication system : A half dup

- 20 - Z3, Z3CV COMMAND : "*" parameter uses two ASCII characters. (see page6 J) section) COMMAND PARAMETER function example Z3 P

- 21 - Z3PS COMMAND : "*" parameter uses two ASCII characters. (see page6 J) section) COMMAND PARAMETER function example Z3PS BAS UP

- 22 - COMMAND PARAMETER function example Z4 CD ZONE4 mode set , and select source at AVR-4810 Z4CD<CR> | ---The name of PARAMETER is

- 23 - ※ANALOG TUNER Control COMMAND PARAMETER function example TF ANUP TUNER Frequency UP/DOWN TFANUP<CR> ANDOWN TFANDOWN<CR&

- 24 - ※XM Control(North America model only) COMMAND PARAMETER function example TF XMUP XM Channel UP/DOWN TFXMUP<CR> XMDOWN TFXMD

- 25 - ※SIRIUS Control(North America model only) COMMAND PARAMETER function example TF STUP SIRIUS Channel UP/DOWN TFSTUP<CR> STD

- 26 - ※HD RADIO Control(North America model only) COMMAND PARAMETER function example TF HDUP HD Channel UP/DOWN , direct change TFHDUP<

- 27 - ※Network/iRadio/mServer/USB/Rhapsody/Napster/iPod Direct Extended Control COMMAND PARAMETER function example SI USB Select INPUT sour

- 28 - COMMAND PARAMETER function example NSA Return Onscreen Display Information List NSA<CR> (ASCII CODE Character) (Return NSA0-NS

- 29 - ※ iPod dock Extended Control ※iPod Dock which AVR-4810 can connect with is ASD-1R/11R. COMMAND PARAMETER function example IP 90 “Cursor

- 3 - NETWORK SETUP of AVR-4810 >Procedure of Network Setup mode. (1)Press MENU button, then Menu appears on FL-display(and GUI) (2)Select “Manua

- 30 - ※Cursor/Enter/Menu(Setup) COMMAND PARAMETER function example MN CUP “Cursor Up” Control MNCUP<CR> CDN “Cursor Down” Contr

- 31 - ※Remote Lock/Panel Lock COMMAND PARAMETER function example SY REMOTE LOCK ON REMOTE CONTROL LOCK ON/OFF SYREMOTE LOCK ON<CR>

- 32 - EVENT(or RESPONSE) and PARAMETER list EVENT PARAMETER function example PW ON POWER ON/STANDBY change PWON<CR> STANDBY PWSTA

- 33 - EVENT PARAMETER function example SI V.AUX SIV.AUX<CR> XM (North America model Only) SIXM<CR> SIRIUS (North Ameri

- 34 - EVENT PARAMETER function example SV DVD VIDEO SELECT mode source change SVDVD<CR> HDP SVHDP<CR> TV SVTV<CR>

- 35 - EVENT PARAMETER function example MS DIRECT SURROUND mode change MSDIRECT<CR> PURE DIRECT MSPURE DIRECT<CR> STEREO

- 36 - EVENT PARAMETER function example MS DOLBY DIGITAL MSDOLBY DIGITAL<CR> DOLBY D EX MSDOLBY D EX<CR> DOLBY D +PL2X

- 37 - EVENT PARAMETER function example MS NEURAL (North America model Only) MSNEURAL<CR> DOLBY D+ MSDOLBY D+<CR> DOLBY

- 38 - EVENT PARAMETER function example VS MONIAUTO HDMI MONITOR setting change VSMONIAUTO<CR> MONI1 VSMONI1<CR> MONI2

- 39 - EVENT PARAMETER function example PS SB:MTRX ON SURROUND BACK MODE change PSSB:MTRX ON<CR> SB:PL2X CINEMA PSSB:PL2X CINEMA<

- 4 - Protocol specification The following three data forms are defined. COMMAND : The message sent to a system(AVR) from a controller(Touch P

- 40 - EVENT PARAMETER function example PS DSX ON DSX change DSX ON<CR> DSX OFF DSX OFF<CR> STW ** STAGE WIDTH change **:00 to

- 41 - EVENT PARAMETER function example PS ATT ON SW ATT change PSATT ON<CR> ATT OFF PSATT OFF<CR> SWR ON SW ON/OFF ch

- 42 - EVENT PARAMETER function example Z2 PHONO ZONE2 source change Z2PHONO<CR> | ---The name of PARAMETER is | USB DIR

- 43 - EVENT PARAMETER function example Z2SLP OFF ZONE2 SLEEP TIMER setting change Z2SLPOFF<CR> 120 Z2SLP120<CR> 90 Z2SLP90<

- 44 - EVENT PARAMETER function example Z3HPF ON ZONE3 HPF ON/OFF change Z3HPFON<CR> OFF Z3HPFOFF<CR> Z3PS BAS ** ZONE3 BA

- 45 - ※ANALOG TUNER Control(AVR model only) EVENT PARAMETER function example TF AN****** (6 digits) TUNER Frequency change TFAN105000<CR>

- 46 - ※XM Control(North America model only) EVENT PARAMETER function example TF XM*** (3 digits) --- ***:XM CH No. TFXM001<CR> (XM001 CH

- 47 - ※SIRIUS Control(North America model only) COMMAND PARAMETER function example TF ST*** (3 digits) --- ***:ST CH No. TFST001<CR&g

- 48 - ※HD RADIO Control(North America model only) EVENT PARAMETER function example TF HD****** (6 digits) --- ****.** kHz at AM band (>05000

- 49 - ※Network/Rhapsody/Napster/USB/iPod Direct Extended Control EVENT PARAMETER function NSA Onscreen Display Information is Answered By th

- 5 - The example of a command * <CR> is the meaning of 0x0D. SIDVD<CR> : Select Input source DVD MSSTEREO<CR> : surro

- 50 - EVENT PARAMETER function <example> NSA0Now Playing USB_????<CR> NSA1※Come Away With Me_???<CR> NSA2※Norah Jones_?

- 51 - EVENT PARAMETER function NSE Onscreen Display Information(mServer/iRadio) isAnswered By the NSE Command. 0 Display Line1 Informa

- 52 - EVENT PARAMETER function <example> NSE0Now Playing USB_????<CR> NSE1※Come Away With Me_???<CR> NSE2※Norah Jones_?

- 53 - ※ iPod Extended Control iPod Dock which AVR-4810 can connect with is ASD-1R/11R. EVENT PARAMETER function IPA Onscreen Display Inf

- 54 - EVENT PARAMETER function IPA <example1> IPA0Artist??????????????????<CR> IPA1※ Ana Caram_????????????<CR> IPA2※ Bad

- 55 - EVENT PARAMETER function IPE Onscreen Display Information(iPod) is Answered By the IPA Command. 0 Display Line1 Information IPE

- 56 - EVENT PARAMETER function IPE <example1> IPE0Artist??????????????????<CR> IPE1※ Ana Caram_????????????<CR> IPE2※ Badi

- 57 - ※Remote Lock/Panel Lock EVENT PARAMETER function example SY REMOTE LOCK ON REMOTE CONTROL LOCK ON/OFF SYREMOTE LOCK ON<CR>

- 6 - Others A) COMMAND is receivable also during transmission of EVENT. B) Since CHANNEL VOLUME changes simultaneously when the SURROUND MODE c

- 7 - COMMAND and PARAMETER list COMMAND PARAMETER Function example PW ON POWER ON/STANDBY change PWON<CR> STANDBY PWSTANDBY<C

- 8 - COMMAND PARAMETER function example CV SB UP ---SURROUND BACKch (SBch 1SP) CVSB UP<CR> SB DOWN CVSB DOWN<CR>

- 9 - COMMAND PARAMETER function example SI NET/USB SINET/USB<CR> RHAPSODY (North America model Only) SIRHAPSODY<CR> NAPSTER