Denon AVR-5700 User Manual download pdf (Page 37)

Playing the input source

Select the input source to be played.

INPUT SELECTOR

(Main unit) (Remote control unit)

When the tape 2 input (TAPE-2 MON)

is selected, the input indicator lights.

Select the input mode.

• Selecting the analog mode

Press the ANALOG button to switch to the analog input.

Lit

ANALOG

(Main unit) (Remote control unit)

• Selecting the external input (6CH/8CH EXT. IN) mode

Press the 6CH/8CH EXT. IN (on the EXT. IN button on the

remote control unit) to switch the external input.

6CH / 8CH

EXT. IN

(Main unit) (Remote control unit)

• Selecting the AUTO, DIGITAL, PCM and RF modes

The mode switches as shown below each time the INPUT

MODE button is pressed.

INPUT MODE

(Main unit) (Remote control unit)

The RF mode can only be selected when the program

source is set to VDP.

Input mode selection function

Different input modes can be selected for the different input

sources. The selected input modes for the separate input sources

are stored in the memory.

1 AUTO (All auto mode)

In this mode, the types of signals being input to the digital and

analog input jacks for the selected input source are detected and

the program in the AVR-5700’s surround decoder is selected

automatically upon playback. This mode can be selected for all

input sources other than PHONO, TAPE-2 and TUNER.

The presence or absence of digital signals is detected, the signals

input to the digital input jacks are identified and decoding and

playback are performed automatically in DTS, Dolby Digital or

PCM (2 channel stereo) format. If no digital signal is being input,

the analog input jacks are selected.

With a VDP input (used most often for Laser Disc), the presence

or absence of a Dolby Digital AC-3 RF signal is also detected. If an

AC-3 RF signal is detected at the Dolby Digital AC-3 RF jack, the

RF signals are decoded and played with priority.

2 DIGITAL (Digital auto mode)

The signals being input to the digital input jacks are identified and

decoding and playback are performed automatically in DTS, Dolby

Digital or PCM format

3 PCM (exclusive PCM signal playback mode)

Decoding and playback are only performed when PCM signals are

being input.

4 RF (exclusive RF signal playback mode)

This can only be selected when the program source is set to VDP.

Decoding and playback are only performed when RF signals are

being input. This is used when the LD player has an AC-3 RF

output jack, but does not have a PCM digital output jack.

5 ANALOG (exclusive analog audio signal playback mode)

The signals input to the analog input jacks are decoded and

played.

6 6CH/8CH EXT. IN (external decoder input jack selection mode)

The signals being input to the external decoder input jacks are

played without passing through the surround circuitry.

NOTES:

• When the AUTO (all auto) mode is selected for the VDP program

source and the mode is switched from pause or chapter skip, etc.,

to playback while playing the Dolby Digital sound of an LD, the

PCM/analog sound may be output momentarily before the sound

switches to Dolby Digital. If this happens, switch to the “RF”

(fixed RF input) mode and the sound will not be interrupted. That is

due to the fact that when paused or during chapter skip, the AC-3

RF signal is interrupted.

• When playing PCM signals in the DIGITAL (digital auto) mode, the

sound may be briefly interrupted when playback starts after

searching on CDs or LDs, depending on how the signals are

recorded on the disc. If this happens, switch to the “PCM”

(exclusive PCM signal playback) mode to prevent the sound from

being interrupted.

• Note that noise will be output when CDs or LDs recorded in DTS

format are played in the “PCM” (exclusive PCM signal playback) or

“ANALOG” (exclusive PCM signal playback) mode. Select the

AUTO (all auto) or DIGITAL (digital auto) mode when playing

signals recorded in DTS from a laser disc player.

13 5

Example: CD

DVD

START LEARNED/TX

HOME THX CINEMA

TUNING

TITLE

MENU/GUIDE

DOLBY / DTS

SURROUND

DIRECT

DSP SIMULATION

5CH STEREO STEREO

INPUT MODE

ANALOG EXT.IN

MUTING

MASTER VOL.

VOLUME DISC SKIP+

SYSTEM CALL POWER

VDP TUNER SHIFT

TV/DBS V.AUX PHONO

VCR-1 CD

TAPE-1

CHANNEL

VCR-2

TAPE-2 MON

TV/VCR

AVR/AVC VIDEO DVD TV

AUDIO

VDP VCR

LOCK

DECK

SYSTEM

SETUP

SURROUND

PARAMETER

RC-853

123

SET

A / B

CALL OFF

SOURCE

789

+10

ANALOG

EXT.IN

INPUT MODE

AUTO DIGITAL

(RF)

PCM

Lightly press on the bottom of

the door to open it.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 63 64

Comments to this Manuals

No comments

Denon AVR-5700 User Manual Page 37

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Denon AVR-5700