Denon AVR-590 User Manual download pdf (Page 22)



ENGLISH

Getting Started Connections Playback Remote Control Information Troubleshooting Speciﬁcations

Making the Optimum Settings for the Connected Speakers Automatically (Audyssey Auto Setup)

The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically.

NOTE

• Loud test sounds may be played during Audyssey MultEQ automatic

speaker setup. This is part of normal operation. If there is background

noise in room, these test signals will increase in volume.

• Do not stand between the speakers and setup microphone or allow

obstacles in the path while the measurements are being made. This

will cause inaccurate readings.

• Make the room as quiet as possible. Background noise can disrupt

the room measurements. Close windows, silence cell phones,

televisions, radios, air conditioners, ﬂuorescent lights, home

appliances, light dimmers, or other devices as measurements may

be affected by these sounds.

Cell phones should be placed away from all audio electronics during

the measurement process as Radio Frequency Interference (RFI)

may cause measurement disruptions (even if the cell phone is not in

use).

Audyssey MultEQ

automatically measures the acoustical

problems in the listening environment to create the best audio

experience for your home theater.

• When the Audyssey Auto Setup procedure is performed, the

MultEQ, Dynamic EQ and Dynamic Volume functions (vpage 41)

are enabled.

• Use the included setup microphone (DM-A409) to perform the

Audyssey Auto Setup procedure.

• Measurements are performed by placing the calibrated microphone

successively at multiple positions throughout the listening area as

shown in GExample qH. For best results, it is strongly recommended

to measure 6 positions so that the measurements have the proper

spatial weighting.

Even if the listening environment is small as shown in GExample wH,

measuring at multiple points throughout the listening environment

results in more effective correction.

n When using Front Height Speakers

 GExample qH GExample wH

FHL FL SW C FR FHR

SL SR

FHL FL SW C FR FHR

SL SR

n When using Surround Back Speakers

 GExample qH GExample wH

FL SW C FR

SL SR

SBRSBL



FL SW C FR

SL SR

SBRSBL

( : Measuring positions)

Important Information

About the main listening position (*M)

The main listening position refers to the most central position where

one would normally sit within the listening environment.

MultEQ uses the measurements from this position to calculate

speaker distance, level, polarity, and the optimum crossover value

for the subwoofer.

FHL :

Front height speaker (L)

FL : Front speaker (L)

SW : Subwoofer

C : Center speaker

FR : Front speaker (R)

FHR : Front height speaker (R)

SR : Surround speaker (R)

SBR : Surround back speaker (R)

SBL : Surround back speaker (L)

SL : Surround speaker (L)

( : Measuring positions)

n Check Audyssey Auto Setup Measurement

Results (Parameter Check) (vpage 23)

Audyssey Auto Setup Flown

Step 1 :Connect the included Setup

Microphone (vpage 20)

Step 3 : Performing the Audyssey Auto Setup

Procedure (vpage 21)

Step 2 :Audyssey Auto Setup Preparations

(vpage 21)

n Changing the PRE OUT connectors assignment

(Pre Assign) (vpage 21)

Settings

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 66 67

Comments to this Manuals

No comments

Denon AVR-590 User Manual Page 22

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Denon AVR-590