Denon AVR-590 User Manual download pdf (Page 29)



Getting Started

Connections Playback Remote Control Information Troubleshooting

Speciﬁcations

ENGLISH

Setting items Setting contents

Channel Level

Set the volume of the test

tone to be the same when it

is output from each speaker.

Test Tone Start : Output test tones.

FL (Front L)/ C (Center)/ FR (Front R)/ SR (Surround R)/

SBR

(Surround Back R)/ SBL

(Surround Back L)/ SL (Surround L)/

FHL (Front Height L)/ FHR (Front Height R)/ SW (Subwoofer):Select

the speaker.

When the “S.Back” setting (vpage 25) is set to “1ch”, “SB” is

displayed.

–12.0dB ~ +12.0dB (0.0dB) : Adjust the volume.

• When “Channel Level” is adjusted, the adjusted values are set for

all the surround modes. To adjust the channel level separately for the

different surround modes, use the operation see “Adjust the volume of

the different speakers” (vpage 45).

• Speakers set to “None” in the “Speaker Conﬁg.” (vpage 25) settings

are not displayed.

• Wheno is pressed while the subwoofer volume is set to “–12dB”, the

“Channel Level” setting switches to “OFF”.

• If output of the test tones begins while the muting mode is set, the

muting mode is canceled.

•

Default : Reset all channel level settings to factory default.

Yes : Reset to the defaults.

No : Do not reset to the defaults.

Crossover Frequency

Outputs at below set

frequency, each speaker’s

bass signal output from the

subwoofer. Set this according

to the low frequency

reproduction capabilities of

the speakers you are using.

This can be set when

“Speaker Conﬁg.” –

“Subwoofer” (vpage

25) is set to “Yes” or

“No”.

Crossover : Outputs at below set frequency, each speaker’s bass signal

output from the subwoofer.

40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz /

250Hz

Advanced : Set the low frequency signals to be output from the signals

of the respective speakers to the subwoofer.

Front / Center / Surround / S.Back / Front Height : Select the speaker.

· 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz /

250Hz : Set the crossover frequency.

•

Setting items Setting contents

Crossover Frequency

• Always set the crossover frequency to “80 Hz”. When using small

speakers, however, we recommend setting the crossover frequency

to a higher frequency.

• For speakers set to “Small”, sound below the crossover frequency

is cut from the sound output. The cut bass sound is output from the

subwoofer or front speakers.

• The speakers that can be set when “Advanced” is selected differ

according to the “Bass Setting” setting (vpage 25).

· When “LFE” is selected, speakers set to “Small” at “Speaker

Conﬁg.” (vpage 25) can be set.

· When “LFE+Main” is selected, speakers can be set regardless of

the speaker size setting.

Making detailed settings (Manual Setup)

: Moves the cursor (Up/Down/Left/Right)

: Decision the setting

: Return to previous menu

Remote control

operation buttons

Displaying the menu

Cancel the menu

Settings

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 66 67

Comments to this Manuals

No comments

Denon AVR-590 User Manual Page 29

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Denon AVR-590