Denon AVR-886 User Manual download pdf (Page 1)

AVR-886

A/V Receiver

DTS-ES Discrete 6.1 and Dolby Digital EX with Power Amps for 7 Channels

■

High-Quality Sound Reproduction

• New High Resolution 32bit Floating Point DSP

• 96 kHz Processing Circuit

• 24 bit, 192 kHz Capability High Resolution D/A Conversion

■ Auto Setup and RoomEQ with Microphone

The AVR-886 includes an Auto Set-up function that performs

basic settings for the speakers based on frequency response

data for the speakers and the listening room that was measured

by a supplied high-performance microphone, and a Room EQ

(equalizer) function that optimizes frequency response

characteristics for the listening room.

■ 3 Sets of Component Video Inputs

The AVR-886 is equipped with 3 sets of component video inputs and 1set of monitor

outputs (all RCA terminals).

■

Fully Discrete, Equal Power 7 Amplifier Channels, 100 Watts Each

Front 100 W + 100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)

Center 100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)

Surround 100 W + 100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)

Surround Back 100 W + 100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)

For optimum Dolby Digital and dts reproduction, the AVR-886 features high quality, wide-

band audio amplification, providing 90 watts power output for each of the 7 main chan-

nels. A large capacity power supply includes a high current power transformer along

with discrete power output devices on all 7 amplifier channels for highest dynamic range

and superb reproduction clarity.

■

DENON's Basic Design for High-Quality Sound Reproduction

•

Power Transformer for High Power Driven

The chassis that supports the large transformer has been designed to absorb vibra-

tion, and the transformer is housed inside a highly rigid frame to secure it more solidly

to the chassis. In addition, a cushioning material has been placed around the core

of the transformer to minimize interference on the signal and enable more faithful

reproduction of the original sound.

The AVR-886 inherits these low-noise design from higher-end models not to mention the

use of short ring.

•

Twin Drive Rectifier

Denon's Twin Drive Rectifier design uses two rectifying diodes in

parallel to bring out the maximum potential of the large trans-

former. Since the rectifiers recharge the large block capacitors at

low impedance, they are able to supply ample current to repro-

duce deep basses as well as sudden bursts of sound from

percussion or other musical instruments.

•

Large Aluminum Extruded Heatsink

Denon uses a large heatsink made of extruded aluminum. It is

placed in a design that ensures mostly uniform temperatures

throughout the heatsink. This will ensures that all channels

respond with equal performance to the demands of the audio

signals.

■

Dual-Channel Surround Back Power Amp for 7.1 Surround

The AVR-886 is equipped with a total of 7 power amps including 2 for the Surround Back

channel speaker to give you more clearly defined sound localization at the rear for 6.1-

channel surround sources such as DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, Dolby Digital

EX, and DTS-ES NEO:6.

■

Assignable surround back (L/R) amplifiers for front (L/R) channel bi-amping,

or for Muti-zone playback

Amplifiers initially reserved for Surround back (L/R) channels can be asigned to bi-wire

Front (L/R) channels to improve playback quality in the front for enhanced listening

enjoyment. Or the amplifiers can be assigned to Zone 2 speakers (with multi-source),

in addition to PREOUT for Zone 2.

■

Wide-Range Play Capability for DVD-Audio and Super Audio CD

The power amp circuits of the AVR-886 have been meticulously designed to repro-

duce the exceptionally high sound quality with wide frequency response from 10 Hz

to 100 kHz.

■

Cinema Equalizer

The sound from movie sources recorded in Dolby Digital, DTS or other formats empha-

sises high-frequency range due to a theater's front speakers being placed behind the

movie screen. If this sound is reproduced in the home theater without correction, the

high-frequency range is too strong. The AVR-886 features a Cinema Equalizer to cor-

rect these high-frequency components so that the sound is clearer and easier to lis-

ten to. (For Dolby Digital, Dolby Pro Logic IIx, Dolby Digital EX and DTS surround

modes)

■

On Screen Display

The AVR-886 lets you make system settings via displays on your TV screen from the

comfort of your chair.

■

Personal Memory Plus, for Easy Operation

The AVR-886 includes the Personal Memory Plus function that automatically

remembers the surround mode you last used for each program source, so that you do

not need to select the mode again for that program.

■

Acclaimed Customisation Feature

As with all of Denon’s high-grade A/V receiver, the AVR-886 lets you adjust speaker

configuration, delay times and other parameters so that you can customize the perfor-

mance of the AVR-886 to suit your own home theater and enhance operating ease.

These customized features are then stored, for each source input and surround mode,

in Personal Memory Plus so constant readjustments are not required.

TENTATIVE

AVR886_E3.qxd 05.8.19 14:43 Page 1

1 2

A/V Receiver 1
TENTATIVE 1

Summary of Contents

Page 1 - TENTATIVE

AVR-886A/V ReceiverDTS-ES Discrete 6.1 and Dolby Digital EX with Power Amps for 7 Channels High-Quality Sound Reproduction• New High Resolution 32bit

Page 2

Multi-Function Preset Memory Remote Controller with Glo-keys DENON's Latest Surround Technology Faithfully Recreates the Surround Sound Produce

Comments to this Manuals

No comments

Denon AVR-886 User Manual Page 1

Browse online or download User Manual for Receivers and Amplifiers Denon AVR-886. Denon AVR-886 User Manual

Summary of Contents

Comments to this Manuals

Denon AVR-886 User Manual Page 1

Browse online or download User Manual for Receivers and Amplifiers Denon AVR-886. Denon AVR-886 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Denon AVR-886