Denon DN-F450R Owner's Manual download pdf (Page 33)

When an open/close type wired remote switch or another DN-F450R

is connected to the REMOTE (input) terminal 1 on DN-F450R, you can

perform the following operations.

Wired remote switch operations

When an open/close type wired remote switch such as a foot pedal

is connected to the REMOTE (input) terminal 1 on DN-F450R,

the following operation is performed according to the setting for

“Remote1” in the preset menu.

Wired Remote Control:

• Size : ø6

• Pin : 2 pin

(Tip – Sleeve)

SWITCH

n Start pause (StartPaus)

During recording/playback or recording/playback pause, starts the

operation when the wired remote switch is short circuited (closed)

and pauses the operation when it is open.

n Start pause track (StrtPseTr)

During recording or recording pause, operation starts when the wired

remote switch is closed (short) whereas the operation is paused when

the switch is opened (open).

If the switch is closed (short) again after recording is paused, recording

will restart in a new ﬁle.

n Mark

During recording/playback or recording/playback pause, adds a mark

when the wired remote switch becomes short circuited (closed).

n Manual track (ManualTrk)

During recording or recording pause, a new ﬁle is created when the

wired remote switch is closed (short).

n Cascade

During recording or pause, recording starts when the wired remote

switch is closed (short).

Start pause

(Recording,

playback)

Start pause

track

(Only when

recording)

Mark

(Recording,

playback)

Manual

track

(Only when

recording)

Cascade

(Only when

recording)

Open→Closed

Start Start

Add

mark

Create

new ﬁle

Start

Closed→Open

Pause

Pause at

the next

ﬁle

--- --- ---

Example: Start pause

(Switch)

(Status)

Stop

Recording,

playback

Stop

Open

Closed

Open

Cascade recording

The cascade recording function automatically continues recording on

the second DN-F450R if the SD card set in the ﬁrst DN-F450R runs out

of recording space during recording.

You can perform the cascade recording function by connecting

another DN-F450R to this DN-F450R via REMOTE (input) terminal 1.

Use a monaural audio cable to connect REMOTE

terminal 1 of both DN-F450R recorders to each other.

Set “Remote1” preset menu to “Cascade” on both

DN-F450R recorders.

• For the setting method, see “Remote1” (vpage13).

Press REC/M.TRACK to put both DN-F450R recorders

in pause state.

Press REC/M.TRACK on the recorder with which you

want to record.

Recording starts.

• When the SD card set in the ﬁrst DN-F450R runs out of recording

space during recording, recording is continued automatically on the

second DN-F450R.

NOTE

• Unless you put the DN-F450R that is not recording in the recording

pause state, the cascade recording function will not be performed.

• If the SD card set in the second DN-F450R (that takes over recording)

is running low of recording space, the cascade recording function

will not be performed.

Control function

REMOTE terminal 1

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 51 52

Comments to this Manuals

No comments

Denon DN-F450R Owner's Manual Page 33

Comments to this Manuals

Related products and manuals for Recording Equipment Denon DN-F450R