Denon CDR-1000 Operations Instructions download pdf (Page 4)

ENGLISH

The accessorious remote control unit is equipped with “system call” function allowing a series of remote control

signals to be transmitted by pressing a single button.

This function can be used for example to turn on the amplifier’s power, select the input source, turn on the

monitor TV’s power, turn on the source component’s power and set the source to the play mode, all at the touch

of a button.

System call

Press the power ON/SOURCE button and the

OFF button at the same time.

• The LEARNED/TX indicator flashes.

Press the CALL 1 button.

• The mode selector buttons and LEARNED/TX

indicator flash.

2, 6

(1) System call buttons

Up to 10 signals each can be stored at the

“CALL1” and “CALL2” buttons.

(2) Storing system call signals

Press the mode buttons of the equipment that

is to be registered to System Call.

Press the buttons whose remote control signals

you want to store one by one.

Repeat steps 3 and 4 to register the desired

buttons.

Press the CALL1 or CALL2 button and register

System Call.

NOTES:

• The remote control signals for the buttons

pressed while storing the system call signals are

transmitted when the buttons are pressed, so

cover the remote sensor or take other measures

so that the components do not operate while

the signals are being stored.

• The mode button and LEARNED/TX indicator

flashing rapidly if you have already stored the

maximum number of signals.

Press the button at which the system call

signals have been stored.

• The stored signals are transmitted

successively.

(3) Using the system call function

Punch Through

(1) Punch through button

Buttons used in the CD, CDR/MD, TAPE,

DVD/VDP, and VCR modes can be assigned to the

buttons shown on the diagram at the right which

are not normally used in the TV and DBS/CABLE

modes.

For example, when the CD mode is set to the

punch through mode in the TV mode, the CD

mode’s PLAY, STOP, MANUAL SEARCH, AUTO

SEARCH, PAUSE and DISC SKIP buttons’ signals

are sent in the TV mode.

Press the power ON/SOURCE button and the

OFF button at the same time.

• The LEARNED/TX indicator flashes.

Press the 1 (play) button.

• TV and DBS/CABLE mode buttons and

LEARNED/TX indicator flash.

(2) Making the punch through setting

Press the mode button of the equipment for

which Punch Through is to be set.

• The CD, CDR/MD, TAPE, DVD/VDP, and VCR

mode buttons and LEARNED/TX indicator will

flash.

Press the mode button of the equipment that is

to be punched through.

• The mode button that was set will light.

1 2 3 4 5

Comments to this Manuals

No comments

Denon CDR-1000 Operations Instructions Page 4

Comments to this Manuals