Denon AVR-990 User Manual Page 1

-1- DENON AVR control protocol Ver 6.4.0 Application model : AVR-3310/AVR-990/AVC-3310 Revision.6.4.0 Application terminal: RS-232C/ Ethernet Connec

-10- COMMAND PARAMETER function example SD AUTO set AUTO mode (Priority:HDMI>>DIGITAL>>ANALOG) SDAUTO<CR> HDMI set force

-11- COMMAND PARAMETER function example MS DIRECT Select SURROUND mode MSDIRECT<CR> PURE DIRECT MSPURE DIRECT<CR> STEREO

-12- COMMAND PARAMETER function example VS ASPNRM Set Normal mode VSASPNRM<CR> ASPFUL Set FULL mode VSASPFUL<CR> ASP ? R

-13- COMMAND PARAMETER function example PS TONE CTRL ON PARAMETER setting PSTONE CTRL ON<CR> TONE CTRL OFF TONE CONTROL ON/OFF PSTO

-14- COMMAND PARAMETER function example PS DYNEQ ON Dynamic EQ = ON PSDYNEQ ON<CR> DYNEQ OFF Dynamic EQ = OFF PSDYNEQ OFF<CR>

-15- COMMAND PARAMETER function example PS LFE UP LFE UP/DOWN , direct change to **dB PSLFE UP<CR> LFE DOWN **:00 to 99 by ASCII , 0

-16- COMMAND PARAMETER function example PS ATT ON SW ATT ON/OFF PSATT ON<CR> ATT OFF PSATT OFF<CR> ATT ? Return PSATT S

-17- COMMAND PARAMETER function example PV CN UP CONTRAST UP/DOWN , direct change to **dB PVCN UP<CR> CN DOWN **:44 to 56 by ASCII

-18- Z2 COMMAND : "*" parameter uses two ASCII characters. (see page4 J) section) COMMAND PARAMETER function example Z2 PHONO ZONE2 mo

-19- Z2 COMMAND : "*" parameter uses two ASCII characters. (see page4 J) section) COMMAND PARAMETER function example Z2CS ST ZONE2 Cha

-2- Ⅱ. Ethernet Connector type ： RJ-45(10BASE-T/100BASE-TX) Communication format ： Communication system : A half duplex

-20- Z3 COMMAND : "*" parameter uses two ASCII characters. (see page4 J) section) Z3 COMMAND ：Invalid at AVR-990 COMMAND PARAMETER function

-21- Z3 COMMAND : "*" parameter uses two ASCII characters. (see page4 J) section) Z3 COMMAND ：Invalid at AVR-990 COMMAND PARAMETER function

-22- ※ANALOG TUNER Control (AVR model only.except North America model) COMMAND PARAMETER function example TF ANUP TUNER Frequency UP/DOWN TFAN

-23- ※SIRIUS Control(North America model only) COMMAND PARAMETER function example TF STUP SIRIUS Channel UP/DOWN TFSTUP<CR> STDOWN

-24- ※HD RADIO Control(North America model only) COMMAND PARAMETER function example TF HDUP HD Channel UP/DOWN , direct change TFHDUP<CR>

-25- ※Network/iRadio/mServer/USB/Rhapsody/Napster Extended Control COMMAND PARAMETER function example SI USB Select INPUT source NET/USB and USB

-26- COMMAND PARAMETER function example NSA Return Onscreen Display Information List NSA<CR> (ASCII CODE Character) (Return NSA0

-27- ※iPod dock Extended Control iPod Dock which AVR-3310/AVR-990/AVC-3310 can connect with is ASD-1R/11R. COMMAND PARAMETER function example IP 9

-28- ※Cursor/Enter/Menu(Setup) COMMAND PARAMETER function example MN CUP “Cursor Up” Control MNCUP<CR> CDN “Cursor Down” Control

-29- EVENT(or RESPONSE) and PARAMETER list EVENT PARAMETER function example PW ON POWER ON/STANDBY change PWON<CR> STANDBY PWSTANDB

-3- NETWORK SETUP of AVR-3310/AVR-990/AVC-3310 >Procedure of Network Setup mode. (1)Press MENU button, then System Setup Menu appears on FL-displa

-30- EVENT PARAMETER function example SI SIRIUS (North America model Only) SISIRIUS<CR> HDRADIO (North America model Only) SIHDRADIO

-31- EVENT PARAMETER function example MS DIRECT SURROUND mode change MSDIRECT<CR> PURE DIRECT MSPURE DIRECT<CR> STEREO

-32- EVENT PARAMETER function example MS DTS NEO:6 C MSDTS NEO:6 C<CR> DTS NEO:6 M MSDTS NEO:6 M<CR> DTS SURROUND MS

-33- EVENT PARAMETER function example MS DTS HD MSDTS HD<CR> DTS HD MSTR MSDTS HD MSTR<CR> DTS EXPRESS MSDTS EXPRESS

-34- EVENT PARAMETER function example VS ASPNRM ASPECT setting change VSASPNRM<CR> ASPFUL VSASPFUL<CR> SC48P Resolution

-35- EVENT PARAMETER function example PS TONE CTRL ON TONE CTRL ON/OFF change PSTONE CTRL ON<CR> TONE CTRL OFF PSTONE CTRL OFF<

-36- EVENT PARAMETER function example PS DYNVOL ON Dynamic VOLUME direct change PSDYNVOL ON<CR> DYNVOL OFF PSDYNVOL OFF<CR>

-37- EVENT PARAMETER function example PS RSZ S ROOM SIZE change PSRSZ S<CR> RSZ MS PSRSZ MS<CR> RSZ M PSRSZ M<CR&

-38- EVENT PARAMETER function example Z2 PHONO ZONE2 source change Z2PHONO<CR> | ---The name of PARAMETER is | USB DIREC

-39- EVENT PARAMETER function example Z3 PHONO ZONE3 source change Z3PHONO<CR> | ---The name of PARAMETER is | USB DIREC

-4- Protocol specification The following three data forms are defined. COMMAND : The message sent to a system(AVR) from a controller(Touch Pane

-40- ※ANALOG TUNER Control (AVR model only.except North America model) EVENT PARAMETER function example TF AN****** (6 digits) TUNER Frequency cha

-41- ※SIRIUS Control（North America Model Only） EVENT PARAMETER function example TF ST*** (3 digits) --- ***:ST CH No. TFST001<CR> (ST00

-42- ※HD RADIO Control(North America model only) EVENT PARAMETER function example TF HD****** (6 digits) --- ****.** kHz at AM band (>050000 is

-43- ※Network/iRadio/mServer/USB/Rhapsody/Napster Extended Control EVENT PARAMETER function NSA Onscreen Display Information is Answered By th

-44- EVENT PARAMETER function NSE Onscreen Display Information(mserver/iRadio) isAnswered By the NSE Command. 0 Display Line1 Information NS

-45- ※iPod Extended Control EVENT PARAMETER function IPA Onscreen Display Information is Answered By the IPA Command. 0 Display Line

-46- EVENT PARAMETER function IPA <example1-for ASD-1R> IPA0Artist??????????????????<CR> IPA1※ Ana Caram_????????????<CR> IPA

-47- EVENT PARAMETER function IPE Onscreen Display Information(iPOD) is Answered By the IPA Command. 0 Display Line1 Information IPE0

-48- EVENT PARAMETER function IPE <example1-for ASD-1R> IPE0Artist??????????????????<CR> IPE1※ Ana Caram_????????????<CR> IPE

-49- ※Remote Lock/Panel Lock EVENT PARAMETER function example SY REMOTE LOCK ON REMOTE CONTROL LOCK ON/OFF SYREMOTE LOCK ON<CR> REMOTE

-5- The example of a command * <CR> is the meaning of 0x0D. SIDVD<CR> : Select Input source DVD MSSTEREO<CR> : surround

-6- Others A) COMMAND is receivable also during transmission of EVENT. B) Since CHANNEL VOLUME changes simultaneously when the SURROUND MODE chan

-7- COMMAND and PARAMETER list COMMAND PARAMETER function example PW ON POWER ON/STANDBY change PWON<CR> STANDBY PWSTANDBY<CR&g

-8- COMMAND PARAMETER function example CV SB UP ---SURROUND BACKch (SBch 1SP) CVSB UP<CR> SB DOWN CVSB DOWN<CR> SB

-9- COMMAND PARAMETER function example ZM ON MAIN ZONE ON/OFF change ZMON<CR> OFF ZMOFF<CR> ? Return ZM Status ZM?<C