Denon AVR-990 User Manual download pdf (Page 3)

-3-

NETWORK SETUP of AVR-3310/AVR-990/AVC-3310

>Procedure of Network Setup mode.

(1)Press MENU button, then System Setup Menu appears on FL-display(and GUI)

(2)Select “Manual Setup > Network Setup > Network Connecting > Detail” .

(3)Set parameters described below.

<DHCP> "ON"---Use this setting when DHCP server is on the local network.

"OFF"---Use this setting when DHCP server is not on the local network.

<IP Address> When <DHCP> sets "OFF”, please set IP address.

When <DHCP> sets "ON”, you can confirm the IP address that is set by server.

<Subnet Mask> When <DHCP> sets "OFF”, please set Subnet Mask.

When <DHCP> sets "ON”, you can confirm the Subnet Mask that is set by server.

<Gateway> Set the address of Gateway when Gateway is on the local network.

Do not set this parameter when Gateway is not on the local network.

<Primary DNS> Do not set this parameter.

<Secondary DNS> Do not set this parameter.

<Proxy> Set this parameter "OFF".

(1)Press MENU button, then Menu appears on FL-display (and GUI)

(2)Select “Manual Setup > Network Setup > Other > Network Standby”

(3)Set parameters described below.

“ON ”---Use this setting when using the AVR-3310 connected in a network.

“OFF ”--- Use this setting when not using the AVR-3310 connected in a network.

This setting is reducing the power consumption in the standby mode.

1 2 3 4 5 6 7 8 ... 48 49

No comments

Denon AVR-990 User Manual Page 3