Denon DHT FS5 - X-SPACE Surround System Home Theater Speaker Sys Owner's Manual Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 17
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
Getting Started Installation Connections Settings Operation Other Functions
ENGLISH

n
Front Speaker Unit
Type: 1-way 6-speaker
Rated output:
25 W x 4 (6 Ω/ohms) + 50 W x 1 (3 Ω/ohms)
Input sensitivity: 500 mV / 22 kΩ/kohms / 250 mV / 22 kΩ/kohms (selectable)
Frequency response: 80 Hz ~ 20 kHz
S/N ratio: 100 dB
Subwoofer preout: Output : 1 Vrms
Frequency : 12 ~ 150Hz
Power supply: U.S.A., Canada models : AC 120 V, 60 Hz
European models : AC 230 V, 50 Hz
Power consumption:
When power is on : 33 W
In standby : 0.5 W
Speaker units:
8 cm (3-5/32”) cone type x 6
Maximum external dimensions:
Without feet : 750 (W) x 118 (H) x 138 (D) mm
(29-17/32” x 4-41/64” x 5-7/16”)
With feet : 750 (W) x 140 (H) x 138 (D) mm
(
29-17/32” x 5-1/8” x 5-7/16”)
Weight: 5.1 kg (11 lbs 4 oz)
n
Remote Control Unit (RC-1095)
Remote control method: Infrared pulse method
Batteries: R03/AAA Type (two batteries)
Maximum external dimensions:
49 (W) x 220 (H) x 24 (D) mm (1-59/64” x 8-21/32“ x 15/16”)
Weight: 110 g (Approx. 4 oz) (including batteries)
* For purposes of improvement, specifications and design are subject to change without notice.
Specifications
Display Cause Measures
A signal with a sampling frequency
of 96 kHz (not compatible) has
been input.
Either switch to the input from a player with a sampling
frequency with which the set is compatible, namely
32, 44.1 or 48 kHz, or use analog connections.
The set’s internal circuitry is not
operating properly.
Turn off the power, then turn it back on. If the same
error message is displayed again, contact your store of
purchase for repairs.
The temperature inside the set is
too high.
Turn off the power and wait for a while.
There is a problem with the
speaker connections.
Turn off the power, then turn it back on. If is
displayed again, contact your store of purchase for
repairs.
The temperature inside the set is
too high.
Turn off the power and wait for a while.
n Error Messages
Troubleshooting Specifications
Page view 15
1 2 ... 11 12 13 14 15 16 17

Comments to this Manuals

No comments