Denon AVR 1909 - AV Receiver Owner's Manual download pdf (Page 15)



Getting Started Setup Playback Remote Control Multi-zone Information Troubleshooting

ENGLISH

Speciﬁcations

With HDMI connections, the video and audio signals can be transferred with a single cable.

065

)%.*

Compatible

audio format

Details

Discs

(examples)

2-channel linear

PCM

2ch 32-192 kHz

16/20/24 bits

CD, DVD-Video,

DVD-Audio

Multi-channel

linear PCM

8ch 32-192 kHz

16/20/24 bits

DVD-Audio,

Blu-ray

Dolby Digital, DTS Bitstream DVD-Video

Dolby Digital Plus,

Dolby TrueHD,

DTS-HD

Bitstream Blu-ray

Monitor

Blu-ray Disc

player /

DVD player

b The AVR-1909 is equipped for HDMI

version 1.3a. This version is compatible

with other versions, allowing connection

to all components equipped with an HDMI

connector.

b The AVR-1909 is compatible with 30- and 36-

bit Deep Color.

In order to play the digital video and audio signals of a Blu-ray, DVD- Video or DVD-Audio disc using HDMI/

DVI connections, both the connected Blu-ray Disc player / DVD player and monitor must be equipped for

a copyright protection system called “HDCP” (High-bandwidth Digital Content Protection).

HDCP is a copy protection technology consisting of data encoding and mutual identiﬁcation of the

devices.

The AVR-1909 is HDCP-compatible. For details on the Blu-ray Disc player / DVD player or monitor you are

using, refer to its operating instructions.

• When the AVR-1909 and Blu-ray Disc player / DVD player are connected using an HDMI cable, also

connect the AVR-1909 and monitor using an HDMI cable.

• If the connected monitor or Blu-ray Disc player / DVD player only has a DVI-D connector, use an HDMI/DVI

converter cable. When using a DVI cable, no audio signals are transmitted.

• Use a Deep Color compatible cable for connection to Deep Color compatible devices.

When connecting with an HDMI/DVI converter cable (adapter)

• HDMI video signals are theoretically compatible with the DVI format.

When connecting to a monitor, etc., equipped with a DVI-D connector, connection is possible using an

HDMI/DVI converter cable, but depending on the combination of components in some cases the video

signals will not be output.

• When connecting using an HDMI/DVI converter adapter, the video signals may not be output properly

due to poor connections with the connected cable, etc.

• By default, the HDMI audio signals are output from the speakers connected to the AVR-1909.

• To output the sound from the TV, make the settings at menu “Manual Setup” – “HDMI Setup” – “HDMI

Audio Out” – “TV” (vpage 32).

NOTE

• The AVR-1909 cannot be controlled from another device via the HDMI cable.

• The audio signals output from the HDMI connector (sampling frequency, bit rate, etc.) may be restricted

by the connected device.

• Video signals are not output properly when using devices that are not HDCP-compatible.

• Video signals are not output if the input video signals do not match the monitor’s resolution. In this

case, switch the Blu-ray Disc player / DVD player’s resolution to a resolution with which the monitor is

compatible.

• If the menu “Manual Setup” – “HDMI Setup” – “HDMI Audio Out” setting (vpage 32) is set to

“AMP”, the sound may be interrupted when the monitor’s power is turned off.

• Use a cable on which the HDMI logo is indicated (a certiﬁed HDMI product) for connection to the HDMI

connector. Normal playback may not be possible when using a cable other than one on which the HDMI

logo is indicated (a non-HDMI-certiﬁed product).

• If the monitor or Blu-ray Disc player / DVD player does not support Deep Color, deep color signal transfer

is not possible.

• If the monitor or Blu-ray Disc player / DVD player does not support xvYCC, xvYCC signal transfer is not

possible.

• If the monitor does not support “Auto Lipsync Correction” function, this function will not work.

• The AVR-1909 is compatible with the HDMI’s CEC (Consumer Electronics Control) function. Please note

the following.

•

It may not work depending on the device it is connected to and its setup.

•

It does not operate with televisions or players that are not compatible with HDMI’s CEC.

Connecting Equipment with HDMI connectors



Getting Started Setup Playback Remote Control Multi-zone Information Troubleshooting

ENGLISH

Connections

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 91 92

Comments to this Manuals

No comments

Denon AVR 1909 - AV Receiver Owner's Manual Page 15

Comments to this Manuals

Related products and manuals for Telephones Denon AVR 1909 - AV Receiver