Denon AVR 1909 - AV Receiver Owner's Manual download pdf (Page 33)

0

Getting Started Connections Playback Remote Control Multi-zone Information Troubleshooting

ENGLISH

Speciﬁcations

Getting Started Connections Playback Remote Control Multi-zone Information Troubleshooting

ENGLISH

• Select “Large” or “Small” not according to the physical size of the

speaker but according to the low frequency reproduction capabilities

based on the frequency set at “Crossover Frequency” (vpage

31).

• When “Front Speaker” is set to “Small”, “Subwoofer” can

automatically set to “Yes”.

• If “Subwoofer” is set to “No”, “Front Speaker” is automatically set

to “Large”.

• If “Surround Speaker” is set to “None”, “Surround Back Speaker”

are automatically set to “None”.

• When “Front Speaker” is set to “Small”, “Center Speaker” can not

be set to “Large”.

• When using just one surround back speaker, connect it to the left

channel (SBL).

Large

: Select this when using large speakers with ample low

frequency reproduction capabilities.

Small

: Select this when using small speakers without ample low

frequency reproduction capabilities.

None

: Select this when no speaker is connected.

Yes

: Select this when a subwoofer is connected.

: Select this when no subwoofer is connected.

2spkrs

1spkr

Select the number of surround back speakers.

Surround Back Speaker

Select surround back speaker use and size.

[Selectable items]

(

Large

Small

None

)

(

2spkrs

1spkr

)

NOTE

Since “Amp Assign” of AVR-1909 is set to “ZONE2” by default,

audio is not output from the surround back speakers. When using the

surround back speakers with MAIN ZONE, change the “Amp Assign”

setting to “7.1ch” (vpage 35).

Subwoofer Setup

Select low range signal to be reproduced by subwoofer.

• This can be set when menu “Speaker Conﬁguration” – “Subwoofer”

is set to “Yes”.

• Play music or a movie source and select the mode offering the

strongest bass.

• Select “LFE+Main” if you want the bass signals to always be

produced from the subwoofer.

[Selectable items]

LFE

: Play low range and LFE signal of channels set to

“Small”.

LFE+Main

: Play low range and LFE signal of all channels.

Distance

Set distance from listening position to speakers.

Before making the settings, measure the distance from the

listening position to the different speakers.

Feet / Meters

Select unit for distance.

Step

Select step. (smallest distance)

[Selectable items]

1ft

0.1ft

: Can be selected when “Feet” is set.

0.1m

0.01m

: Can be selected when “Meters” is set.

Default

Resets the settings to the default values.

Distance measurement

Select the speaker you want to set, then set the distance.

Set the value closest to the measured distance.

[Variable range]

0.0ft ~ 60.0ft

: Display when “Feet” is set.

0.00m ~ 18.00m

: Display when “Meters” is set.

NOTE

Set the distance between the listening position and the various

speakers to no more than 20.0 ft (6.00 meters).

For details on how to select, set and cancel settings for each menu, see “Menu Operations” (vpage 22).

0

Surround Speaker

Select surround speakers use and size.

[Selectable items]

Large

Small

None

Even when the Surround Back Speaker setting is other than

“None”, sound may not be emitted from the surround back

speaker, depending on the playback source. In this case, make

a menu “Parameter” – “Surround Parameter” – “SB CH Out”

setting other than “OFF” (vpage 48).

Setup

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 91 92

Comments to this Manuals

No comments

Denon AVR 1909 - AV Receiver Owner's Manual Page 33

Comments to this Manuals

Related products and manuals for Telephones Denon AVR 1909 - AV Receiver