Denon AVR 1909 - AV Receiver Owner's Manual download pdf (Page 53)

0

Getting Started Connections Playback Remote Control Multi-zone Information Troubleshooting

ENGLISH

Speciﬁcations

S2 Dynamic EQ

Audyssey Dynamic EQ solves the problem of deteriorating sound

quality as volume is decreased by taking into account human perception

and room acoustics. Audyssey Dynamic EQ works in tandem with

Audyssey MultEQ to provide well-balanced sound for every listener

at any volume level.

NOTE

• “Dynamic EQ” can only be set when auto setup has been

performed.

• “Dynamic EQ” cannot be set in the following situations.

•

If “Auto Setup” fails to be completed.

•

After running Auto Setup, when the number of used speakers has

increased from the number of measured speakers.

• When “MultEQ” is set to “OFF”, “Dynamic EQ” is automatically set

to “OFF”.

• When you set ”Dynamic EQ” to ”ON”, “Tone Control” and “Night

Mode” are switched ”OFF”.

[Selectable items]

: Use Dynamic EQ function.

OFF

: Do not use Dynamic EQ function.

Operating from the main unit or main remote

control unit

Press DYNAMIC VOLUME.

Dynamic EQ / Volume : ON Dynamic EQ : ON / Volume : OFF

Dynamic EQ / Volume : OFF

Before running Auto Setup and after running Auto Setup, if the number

of speakers has increased or you pressed DYNAMIC VOLUME, “Run

Audyssey” is displayed. In this case, either perform Auto Setup again,

or return to the setting after running Auto Setup with “Auto Setup”

– “Parameter Check” – “Restore”.

n Operating conditions for each function

• Dynamic EQ : When “MultEQ” is set to “ON”

• Dynamic Volume : When “Dynamic EQ” is set to “ON”

• Setting : When “Dynamic Volume” is set to “ON”

S1 MultEQ

S2 Dynamic EQ

S3 Dynamic Volume

S4 Setting

S3 Dynamic Volume

Audyssey Dynamic Volume solves the problem of large variations in

volume level between television programs, commercials, and between

the soft and loud passages of movies.

Audyssey Dynamic EQ is integrated into Dynamic Volume so that as

the playback volume is adjusted automatically, the perceived bass

response, tonal balance, surround impression, and dialog clarity

remain the same.

NOTE

• “Dynamic Volume” can only be set when auto setup has been

performed.

• “Dynamic Volume” cannot be set in the following situations.

•

If “Auto Setup” fails to be completed.

•

After running Auto Setup, when the number of used speakers has

increased from the number of measured speakers.

• When “MultEQ” is set to “OFF”, “Dynamic Volume” is automatically

set to “OFF”.

• “Dynamic Volume” and “Night Mode” cannot be used jointly.

[Selectable items]

: Use Dynamic Volume.

The Dynamic Volume effect will be at the level of the

“Setting”.

OFF

: Do not use Dynamic Volume.

Before running Auto Setup and after running Auto Setup, if the number

of speakers has increased or you pressed DYNAMIC VOLUME, “Run

Audyssey” is displayed. In this case, either perform Auto Setup again,

or return to the setting after running Auto Setup with “Auto Setup”

– “Parameter Check” – “Restore”.

Operating from the main unit or main remote

control unit

Press DYNAMIC VOLUME.

Dynamic EQ / Volume : ON

“Green” “Red”

Dynamic EQ : ON / Volume : OFF

Dynamic EQ / Volume : OFF

S4 Setting (Dynamic Volume Setting)

Can be set when “Dynamic Volume” is set to “ON”.

Set Dynamic Volume effect.

[Selectable items]

Midnight

: High setting affects volume the most, causing all sounds

to be of equal loudness.

Evening

: Middle setting prevents loud and soft sounds from

being much louder and softer respectively than average

sounds.

Day

: Low setting provides the least adjustments to the

loudest and softest of sounds.

NOTE

• “Setting” can only be set when auto setup has been performed.

• “Setting” cannot be set in the following situations.

•

If “Auto Setup” fails to be completed.

•

After running Auto Setup, when the number of used speakers has

increased from the number of measured speakers.

•

If “Dynamic Volume” setting is “OFF”.

About Dynamic Volume

Audyssey Dynamic Volume™ solves the problem of large variations

in volume level between television programs, commercials, and

between the soft and loud passages of movies.

Dynamic Volume looks at the preferred volume setting by the user and

then monitors how the volume of program material is being perceived

by listeners in real time to decide whether an adjustment is needed.

Whenever necessary, Dynamic Volume makes the necessary rapid

or gradual adjustments to maintain the desired playback volume

level while optimizing the dynamic range. Audyssey Dynamic EQ is

integrated into Dynamic Volume so that as the playback volume is

adjusted automatically, the perceived bass response, tonal balance,

surround impression, and dialog clarity remain the same whether

watching movies, ﬂipping between television channels, or changing

from stereo to surround sound content.

About Dynamic EQ

Audyssey Dynamic EQ™ solves the problem of deteriorating sound

quality as volume is decreased by taking into account human

perception and room acoustics. Dynamic EQ selects the correct

frequency response and surround levels moment-by-moment at

any user-selected volume setting. The result is bass response,

tonal balance, and surround impression that remain constant

despite changes in volume. Dynamic EQ combines information

from incoming source levels with actual output sound levels in the

room, a prerequisite for delivering a loudness correction solution.

Audyssey Dynamic EQ works in tandem with Audyssey MultEQ to

provide well-balanced sound for every listener at any volume level.

For details on adjusting individual parameters, see “Adjusting the parameters” (vpage 46).

0

Getting Started Connections Playback Remote Control Multi-zone Information Troubleshooting

ENGLISH

Setup

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 91 92

Comments to this Manuals

No comments

Denon AVR 1909 - AV Receiver Owner's Manual Page 53

Comments to this Manuals

Related products and manuals for Telephones Denon AVR 1909 - AV Receiver