Denon AVR 1909 - AV Receiver Owner's Manual download pdf (Page 54)

Speciﬁcations

RESTORER

This function restores compressed audio signals to how they

were before compression and corrects the sense of volume of

the bass and treble to obtain richer playback sound.

About the RESTORER function

• Such compressed audio formats as MP3, WMA (Windows Media

Audio) and MPEG-4 AAC reduce the amount of data by eliminating

signal components that are hard for the human ear to hear. The

RESTORER function generates the signals eliminated upon

compression, restoring the sound to conditions near those of the

original sound before compression. It also corrects the sense of

volume of the bass to obtain richer sound with compressed audio

signals.

• This is displayed on the menu and can be set when the input source

is selected to “XM”, or analog signals (including AM/FM and SIRIUS

signals) or PCM signals (fs = 44.1/48 kHz) are input.

When set to something other than “OFF”, “ ” is displayed.

OFF Mode 1

(RESTORER 64)

Mode 2

(RESTORER 96)

Mode 3

(RESTORER HQ)

The default setting for “iPod” is “Mode3”. All others are set to “OFF”.

[Selectable items]

OFF

Do not use RESTORER.

Mode1

(RESTORER 64):

Optimized mode for compressed sources with very weak highs.

Mode2

(RESTORER 96):

Apply suitable bass and treble boost for all compressed sources.

Mode3

(RESTORER HQ):

Optimized mode for compressed sources with normal highs.

Operating from the main unit or main remote

control unit

Press RESTORER.

Night Mode

Optimized setting for late-night listening.

Audio Delay

Compensate for mismatched timing between video and audio.

• This cannot be adjusted when playing in the EXT. IN, DIRECT or

STEREO mode (with “Front Speaker” set to “Large”, “Tone

Control” to “OFF” and “MultEQ”, “RESTORER” and “Night Mode”

to “OFF”.)

• When the auto lip sync correction function is operating, you can set

within the range 0 ~ 100 ms.

• Store “Audio Delay” for each input source.

Delay audio.

This sets the delay time for audio signals.

[Variable range]

0 ms

200 ms

If you wish to adjust the “Audio Delay” while playing HDMI or

component video signals, press u to set “OSD” to “OFF”. This way

the audio delay can be adjusted while watching the picture. (Press u

again to switch to the on-screen display.)

Operating from the main remote control unit

Press [AUDIO DELAY].

NOTE

• When operating by remote control, the onscreen display is not

shown.

For details on adjusting individual parameters, see “Adjusting the parameters” (vpage 46).

Operating from the main remote control unit

Press [NIGHT].

The “ ” indicator lights when “Low”, “Mid” or “High” is

selected.

OFF Low Mid

High

NOTE

• When the “Dynamic EQ” setting is “ON”, setting is not possible.

• When the “Dynamic Volume” setting is “ON”, setting is not

possible.

• When a HD-Audio (DOLBY DIGITAL Plus, DOLBY TrueHD, DTS-HD)

signal is input, the “Night Mode” can not be selected.



Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting

ENGLISH

Set the dynamic range compression of the output audio.

[Selectable items]

OFF

: Turn night mode off.

Low

: Low setting.

Mid

: Middle setting.

High

: High setting.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 91 92

Comments to this Manuals

No comments

Denon AVR 1909 - AV Receiver Owner's Manual Page 54

Comments to this Manuals

Related products and manuals for Telephones Denon AVR 1909 - AV Receiver