Denon AVR 1909 - AV Receiver Owner's Manual download pdf (Page 67)



Getting Started Connections Setup Remote Control Multi-zone Information Troubleshooting

ENGLISH

Speciﬁcations

Last Function Memory

This stores the settings as they were directly before the standby

mode was set.

When the power is turned back on, the settings are restored to as

they were directly before the standby mode was set.

Backup Memory

The various settings are backed up for about 1 week, even if the

power is turned off or the power cord is disconnected.

Resetting the Microprocessor

Perform this procedure if the display is abnormal or if operations

cannot be performed.

When the microprocessor is reset, all the settings are reset to

their default values.

Turn off the power using <POWER>.

Press <POWER> while simultaneously pressing

<INPUT MODE> and <SPEAKERS>.

Once the display starts ashing at intervals of about 1

second, release the two buttons.

If in step 3 the display does not ﬂash at intervals of about 1 second,

start over from step 1.



Getting Started Connections Setup Remote Control Multi-zone Information Troubleshooting

ENGLISH

Quick Select Function

With this function, the currently playing input source, input mode,

surround mode, MultEQ settings and volume can be stored in the

memory.

Set the input source, surround mode, MultEQ,

Dynamic EQ, Dynamic Volume, Front Speaker

settings and volume to the conditions you want to

store.

Press and hold the desired QUICK SELECT until

“Memory” appears on the display.

The current settings will be memorized.

• To call out the settings, press QUICK SELECT at which the desired

settings were stored.

• The Quick Select name can be changed (vpage 36).

NOTE

Input sources stored with the quick select function cannot be selected

if they have been deleted at menu “Manual Setup” – “Option Setup” –

“Source Delete” (vpage 36). In this case, store them again.

Input Source Volume

Quick Select 1 DVD –40 dB

Quick Select 2 TV/CBL –40 dB

Quick Select 3 VCR –40 dB

[Quick Select Defaults]

Personal Memory Plus Function

This function sets the settings (input mode, surround mode, HDMI

output mode, MultEQ, Dynamic EQ, Dynamic Volume, audio delay

etc.) last selected for the individual input sources.

When you switch to an input source, the settings are automatically

set to the ones that were set the last time that input source was

used.

The surround parameters, tone settings and the volumes of the

different speakers are stored for the individual surround modes.

Playback

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 91 92

Comments to this Manuals

No comments

Denon AVR 1909 - AV Receiver Owner's Manual Page 67

Comments to this Manuals

Related products and manuals for Telephones Denon AVR 1909 - AV Receiver