Denon DVP-602CI Owner's Manual download pdf (Page 21)

Power Saving

Network

Information

• If

you

are

using a broadband router

(DHCP

function), there

no need

to make the settings at "Setting the

Address"

and

"Setting the

Proxy", since the

DHCP

function

set to

"ON"

the DVP-602CI's

default settings.

• If the

DVP-602C1

being used connected to a network without the

DHCP

function, the network settings must

made.

this

case,

some knowledge of networks

required.

For

details, consult a

network administrator.

• If

you

cannot connect to the Internet, recheck the connections

and

settings (iGFpage

13).

• If you do not understand about Internet connection, contact your

ISP

(Internet Service Provider) or the store from which you purchased

your computer.

• DHCP (Dynamic Host Configuration Protocol) :

These

are

systems

which the

address

and

other network

settings

are

automatically set for the

DVP-602CI,

computer,

broadband router

and

network devices.

• DNS (Domain

Name

System) :

This

a system for converting the domain names used when

browsing Internet sites (for example,

www.denon.jp

) into the

addresses actually used for communications (for example,

"202.221.192.106").

0 Network Setup

Wired LAN settings

Use

this procedure to configure the Wired

LAN

settings.

1Connect the LAN cable

(o:::w'page

13).

Turn on the DVP-602CI

(o:::w'page

24).

DVP-602CI

performs automatic network setup due to the

DHCP

function.

When connecting to a network that

has

DHCP

function,

perform the setting

Operation

Set the IP address at the GUI menu "Setup" -

"Network Setup" - "Network Setup".

Set

"OFF".]

Select"

Detail"

and

press the

ENTER

button

Use

the

<11>

button to set "DHCP" to "OFF", then press the V

button.

The

DHCP

function

disabled.

Use

the

f::,

VI>

button to input the address

and

press the

ENTER

button.

Address

Set the

address within the ranges shown below.

The

Network

function cannot

used if other IP addresses

are

set.

CLASS

10.0.0.0 - 10.255.255.255

CLASS

B 172.16.0.0 - 172.31.255.255

CLASS

192.168.0.0 - 192.168255.255

Subnet

Mask

When connecting

xDSL modem or terminal adapter directly

to the

DVP-602CI,

input the subnet mask indicated

the

documentation supplied by your provider. Normally input

255.255.255.0.

Default

Gateway

When connected to a gateway (router), input its

address.

Primary

DNS

Secondary

DNS

If there

only one

DNS

address indicated

the documentation

supplied

your provider, input it at "Primary DNS". If there

are

two

DNS

addresses, input the first one at "Secondary

DNS".

Use

the V button to select "Exit"

and

press the

ENTER

button.

Setup

complete.

When connecting to the network

via

a Proxy server, select"Proxy"

and

press the

ENTER

button (@"page

"Proxy settings").

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 37 38

Comments to this Manuals

No comments

Denon DVP-602CI Owner's Manual Page 21

Comments to this Manuals